EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Patient-Specific Exercises with the Development of an End-Effector Type Upper Limb Rehabilitation Robot

Mingjie Dong iD, Wenpei Fan, Jianfeng Li iD, Pengfei Zhang

Journal of Healthcare Engineering · 27.10.2022 · 2022 · 1-10

DOI: 10.1155/2022/4125606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Healthcare Engineering, erschienen am 27.10.2022. Verfasst von Mingjie Dong und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials and Manufacturing, Beijing University of Technology, No. 100 Pingleiyuan Chaoyang District, Beijing 100124, China. Hauptthemen laut MEDLINE: Exercise Therapy, Robotics. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Municipal Education Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

End-effector type upper limb rehabilitation robots (ULRRs) are connected to patients at one distal point, making them have simple structures and less complex control algorithms, and they can avoid abnormal motion and posture of the target anatomical joints and specific muscles. Given that the end-effector type ULRR focuses more on the rehabilitation of the combined motion of upper limb chain, assisting the patient to perform collaborative tasks, and its intervention has some advantages than the exoskeleton type ULRR, we developed a novel three-degree-of-freedom (DOF) end-effector type ULRR. The advantage of the mechanical design is that the designed end-effector type ULRR can achieve three DOFs by using a four-bar mechanism and a lifting mechanism; we also developed the patient-specific exercises including patient-passive exercise and patient-cooperative exercise, and the advantage of the developed patient-cooperative exercise is that we simplified the human-robot coupling system model into a single spring system instead of the mass-spring-damp system, which efficiently improved the response speed of the control system. In terms of the organization structure of the work, we introduced the end-effector type ULRR’s mechanical design, control system, inverse solution of positions, patient-passive exercise based on the inverse solution of positions and the linear position interpolation of servo drives, and patient-cooperative exercise based on the spring model, in sequence. Experiments with three healthy subjects have been conducted, with results showing good trajectory tracking performance in patient-passive exercise and showing effective, flexible, and good real-time interactive performance in patient-cooperative exercise.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Exercise TherapyRoboticsHumansExoskeleton DevicePostureUpper Extremity

Autor:innen und Institutionen

  • Faculty of Materials and Manufacturing, Beijing University of Technology, No. 100 Pingleiyuan Chaoyang District, Beijing 100124, China.

ORCID-Profile: Mingjie Dong, Jianfeng Li

Förderung

  • National Natural Science Foundation of China
  • Beijing Municipal Education Commission

Zitieren

APA

Dong, M., Fan, W., Li, J., & Zhang, P. (2022). Patient-Specific Exercises with the Development of an End-Effector Type Upper Limb Rehabilitation Robot. Journal of Healthcare Engineering, 2022, 1-10. https://doi.org/10.1155/2022/4125606

Vancouver

Dong M, Fan W, Li J, Zhang P. Patient-Specific Exercises with the Development of an End-Effector Type Upper Limb Rehabilitation Robot. Journal of Healthcare Engineering. 2022;2022:1-10. doi:10.1155/2022/4125606

BibTeX
@article{Dong2022,
  author = {Dong, Mingjie and Fan, Wenpei and Li, Jianfeng and Zhang, Pengfei},
  title = {Patient-Specific Exercises with the Development of an End-Effector Type Upper Limb Rehabilitation Robot},
  journal = {Journal of Healthcare Engineering},
  year = {2022},
  volume = {2022},
  pages = {1--10},
  doi = {10.1155/2022/4125606}
}
Kostenlos starten →