EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Precision Extraction Method for Blade Tip-Timing Signal with Eddy Current Sensor

Ji-wang Zhang, Ke-qin Ding, Guang Chen

International Journal of Rotating Machinery · 13.11.2020 · 2020 · 1-13

DOI: 10.1155/2020/8882858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Rotating Machinery, erschienen am 13.11.2020. Verfasst von Ji-wang Zhang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CSEI, Science and Technology Plan Projects of State Administration for Market Regulation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Online monitoring of high-speed rotating blades has always been a hot topic. Of the various methods, the blade tip timing (BTT) technique, based on eddy current sensors, is considered to be the most promising. However, BTT signals are easily influenced by various factors, which means that the accurate extraction of BTT signals remains a challenge. To try to solve this problem, the causes of measurement error were analyzed. The three main reasons for the error were established: the variation in blade tip clearance, the interference of background noise, and the asymmetry of the blade tip shape. Further, pertinent improvement methods were proposed, and a compensation method was proposed for the errors caused by the variation of tip clearance. A new denoising and shaping algorithm based on ensemble empirical mode decomposition (EEMD) was introduced for the errors caused by background noise. Additionally, an optimal installation position of the sensor was also proposed for the errors caused by the asymmetry of the blade tip shape. Finally, simulations and experiments were used to demonstrate the improved methodology. The results show that the measurement error on vibration amplitude and vibration frequency using the proposed method is less than 2.89% and 0.17%, respectively, which is much lower than the traditional method (24.44% and 0.39%, respectively).

Förderung

  • CSEI
  • Science and Technology Plan Projects of State Administration for Market Regulation

Zitieren

APA

Zhang, J., Ding, K., & Chen, G. (2020). High-Precision Extraction Method for Blade Tip-Timing Signal with Eddy Current Sensor. International Journal of Rotating Machinery, 2020, 1-13. https://doi.org/10.1155/2020/8882858

Vancouver

Zhang J, Ding K, Chen G. High-Precision Extraction Method for Blade Tip-Timing Signal with Eddy Current Sensor. International Journal of Rotating Machinery. 2020;2020:1-13. doi:10.1155/2020/8882858

BibTeX
@article{Zhang2020,
  author = {Zhang, Ji-wang and Ding, Ke-qin and Chen, Guang},
  title = {High-Precision Extraction Method for Blade Tip-Timing Signal with Eddy Current Sensor},
  journal = {International Journal of Rotating Machinery},
  year = {2020},
  volume = {2020},
  pages = {1--13},
  doi = {10.1155/2020/8882858}
}
Kostenlos starten →