EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction Model of Industrial Robot Joint with Temperature Correction by Example of KUKA KR10

Maksim N. Nevmerzhitskiy, Boris S. Notkin, Andrey V. Vara, Konstantin V. Zmeu

Journal of Robotics · 06.01.2019 · 2019 · 1-11

DOI: 10.1155/2019/6931563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Robotics, erschienen am 06.01.2019. Verfasst von Maksim N. Nevmerzhitskiy und 3 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality of industrial robots essentially depends on the properties of their kinematic couples. This research has involved conducting an experimental study of the friction torque in a joint of the KUKA KR10 industrial robot and building its model. It has been established that the largest impact on friction in the joint is caused by its axial load and velocity, as well as the temperature of the mechanism, which is generally not homogeneous. It is not possible to measure temperature fields in the joints of a serial industrial robot directly. This study has set forth a method to estimate friction torque taking into account the temperature factor indirectly. For this, we have used the motor temperature available for measuring in combination with special periodical motions, performed by the robot, during which we estimated the actual friction torque in the joint and calculated a temperature correction based on our findings.

Förderung

  • Ministry of Education and Science of the Russian Federation

Zitieren

APA

Nevmerzhitskiy, M. N., Notkin, B. S., Vara, A. V., & Zmeu, K. V. (2019). Friction Model of Industrial Robot Joint with Temperature Correction by Example of KUKA KR10. Journal of Robotics, 2019, 1-11. https://doi.org/10.1155/2019/6931563

Vancouver

Nevmerzhitskiy MN, Notkin BS, Vara AV, Zmeu KV. Friction Model of Industrial Robot Joint with Temperature Correction by Example of KUKA KR10. Journal of Robotics. 2019;2019:1-11. doi:10.1155/2019/6931563

BibTeX
@article{Nevmerzhitskiy2019,
  author = {Nevmerzhitskiy, Maksim N. and Notkin, Boris S. and Vara, Andrey V. and Zmeu, Konstantin V.},
  title = {Friction Model of Industrial Robot Joint with Temperature Correction by Example of KUKA KR10},
  journal = {Journal of Robotics},
  year = {2019},
  volume = {2019},
  pages = {1--11},
  doi = {10.1155/2019/6931563}
}
Kostenlos starten →