Engineering Design of a Voloxidizer with a Double Reactor for the Hull Separation of Spent Nuclear Fuel Rods
Science and Technology of Nuclear Installations · 2017 · 2017 · 1-12
DOI: 10.1155/2017/9854830 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science and Technology of Nuclear Installations, 2017. Verfasst von Young-Hwan Kim und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology.
Abstract (Originalsprache)
A voloxidizer with a double reactor capable of processing several tens of kilograms of HM/batch of nuclear spent fuel has been developed for the decladding and voloxidation of rod-cuts into hulls and pellets through the conversion of UO 2 pellets to U 3 O 8 powder. In this study, we optimized the engineering design of this voloxidizer to improve its hull-recovery ratio. First, we tested the oxidation performance of the device prototype and evaluated the effectiveness of various mechanical and chemical voloxidizing methods. On the basis of the results, we selected the screw-and-rotation method for the double rotary drum. Next, we derived a theoretical equation for calculating the optimal reactor volume for various rod-cut weights and lengths and then validated the equation using centimeter-scale acryl reactors and hulls. Subsequently, we modularized the main components such as the heater, utility, motor, reactor, valve, and structure. The double reactor was subject to preliminary separation tests of hulls and powder. Moreover, the hull-separation performance of the voloxidizer reactor was tested at a loading of 50 kg HM/batch. Finally, the remote assembling and disassembling possibility of the modules were experimentally optimized.
Förderung
- Ministry of Science and Technology
Zitieren
APA
Kim, Y., Cho, Y., Lee, J., Lee, J., Jeon, S., & Ahn, D. (2017). Engineering Design of a Voloxidizer with a Double Reactor for the Hull Separation of Spent Nuclear Fuel Rods. Science and Technology of Nuclear Installations, 2017, 1-12. https://doi.org/10.1155/2017/9854830
Vancouver
Kim Y, Cho Y, Lee J, Lee J, Jeon S, Ahn D. Engineering Design of a Voloxidizer with a Double Reactor for the Hull Separation of Spent Nuclear Fuel Rods. Science and Technology of Nuclear Installations. 2017;2017:1-12. doi:10.1155/2017/9854830
BibTeX
@article{Kim2017,
author = {Kim, Young-Hwan and Cho, Yung-Zun and Lee, Jae-Won and Lee, Ju-Hoo and Jeon, Sang-Chae and Ahn, Do-Hee},
title = {Engineering Design of a Voloxidizer with a Double Reactor for the Hull Separation of Spent Nuclear Fuel Rods},
journal = {Science and Technology of Nuclear Installations},
year = {2017},
volume = {2017},
pages = {1--12},
doi = {10.1155/2017/9854830}
}
EUVIMED