Influence of Varnish on Bearing Performance and Vibration of Rotating Machinery
International Journal of Rotating Machinery · 2017 · 2017 · 1-10
DOI: 10.1155/2017/9131275 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Rotating Machinery, 2017. Verfasst von Chu Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Varnish is a kind of fouling adhered on bearing inner face near the load zone. The model to analyze its influence on bearing performance and rotor vibration was set up. Pressure and temperature distribution were solved on the basis of the Reynolds equation by the iteration method simultaneously. It is found that bearing performance is changed by the step flow effect at the leading edge of the varnish. Its influence is more obvious when the rotating speed is low. Bearing varnish results in a large decrease of minimum clearance and an increase in the oil film temperature and pressure. Loading capacity of bearing is also decreased. It is harmful to the bearing. With the varnish, the minimum oil film thickness decreases. This leads to an increase of bearing stiffness and damping coefficients. Its influence is larger in the horizontal direction than that in the vertical direction. The trend of unbalance response to rotating speed is similar. There is little influence of the varnish on the modal frequency. However, system stability is improved due to the increased bearing damping coefficients.
Zitieren
APA
Zhang, C., Yang, J., Liu, S., Gao, Q., & Yang, Y. (2017). Influence of Varnish on Bearing Performance and Vibration of Rotating Machinery. International Journal of Rotating Machinery, 2017, 1-10. https://doi.org/10.1155/2017/9131275
Vancouver
Zhang C, Yang J, Liu S, Gao Q, Yang Y. Influence of Varnish on Bearing Performance and Vibration of Rotating Machinery. International Journal of Rotating Machinery. 2017;2017:1-10. doi:10.1155/2017/9131275
BibTeX
@article{Zhang2017,
author = {Zhang, Chu and Yang, Jian-Gang and Liu, Shi and Gao, Qing-Shui and Yang, Yi},
title = {Influence of Varnish on Bearing Performance and Vibration of Rotating Machinery},
journal = {International Journal of Rotating Machinery},
year = {2017},
volume = {2017},
pages = {1--10},
doi = {10.1155/2017/9131275}
}
EUVIMED