Numerical Simulation of Galvanic Corrosion between Carbon Steel and Low Alloy Steel in a Bolted Joint
International Journal of Corrosion · 2017 · 2017 · 1-10
DOI: 10.1155/2017/6174904 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Corrosion, 2017. Verfasst von Rachid Radouani und 2 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The galvanic corrosion of a bolt joint combining carbon steel end plate and low alloy steel bolt was investigated electrochemically in a 1 M HCl solution. The corrosion parameters of the joint components were used for numerical simulation using Comsol Multiphysics software to analyze the galvanic corrosion behavior at the contact zone between the head bolt and the end plate. In this research work we evaluate the variation of the corrosion rate in the steel end plate considered as the anode, in order to determine the lifetime of the bolted assembly used in steel structures. Three materials (20MnCr5, 42CrMo4, and 32CrMoV13) and three bolts (M12, M16, and M20) were tested in two thicknesses of electrolyte 1 M HCl ( e = 1 mm, e = 20 mm). It is found that the corrosion rate of the anode part (end plate) is higher for 32CrMoV13 materials and it increases if both diameter of the bolt and thickness of the electrolyte increase (Cr(M20) > Cr(M16) > Cr(M12) and Cr( e = 20 mm) > Cr( e = 1 mm)). This corrosion rate is higher in the contact area between the bolt head and the end plate, and it decreases if we move away from this contact area.
Zitieren
APA
Radouani, R., Echcharqy, Y., & Essahli, M. (2017). Numerical Simulation of Galvanic Corrosion between Carbon Steel and Low Alloy Steel in a Bolted Joint. International Journal of Corrosion, 2017, 1-10. https://doi.org/10.1155/2017/6174904
Vancouver
Radouani R, Echcharqy Y, Essahli M. Numerical Simulation of Galvanic Corrosion between Carbon Steel and Low Alloy Steel in a Bolted Joint. International Journal of Corrosion. 2017;2017:1-10. doi:10.1155/2017/6174904
BibTeX
@article{Radouani2017,
author = {Radouani, Rachid and Echcharqy, Younes and Essahli, Mohamed},
title = {Numerical Simulation of Galvanic Corrosion between Carbon Steel and Low Alloy Steel in a Bolted Joint},
journal = {International Journal of Corrosion},
year = {2017},
volume = {2017},
pages = {1--10},
doi = {10.1155/2017/6174904}
}
EUVIMED