Full Aperture CO 2 Laser Process to Improve Laser Damage Resistance of Fused Silica Optical Surface
Advances in Condensed Matter Physics · 2014 · 2014 · 1-5
DOI: 10.1155/2014/676108 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Condensed Matter Physics, 2014. Verfasst von Wei Liao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 5 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 3.0).
Abstract (Originalsprache)
An improved method is presented to scan the full-aperture optical surface rapidly by using galvanometer steering mirrors. In contrast to the previous studies, the scanning velocity is faster by several orders of magnitude. The velocity is chosen to allow little thermodeposition thus providing small and uniform residual stress. An appropriate power density is set to obtain a lower processing temperature. The proper parameters can help to prevent optical surface from fracturing during operation at high laser flux. S-on-1 damage test results show that the damage threshold of scanned area is approximately 40% higher than that of untreated area.
Zitieren
APA
Liao, W., Zhang, C., Sun, X., Zhang, L., & Yuan, X. (2014). Full Aperture CO 2 Laser Process to Improve Laser Damage Resistance of Fused Silica Optical Surface. Advances in Condensed Matter Physics, 2014, 1-5. https://doi.org/10.1155/2014/676108
Vancouver
Liao W, Zhang C, Sun X, Zhang L, Yuan X. Full Aperture CO 2 Laser Process to Improve Laser Damage Resistance of Fused Silica Optical Surface. Advances in Condensed Matter Physics. 2014;2014:1-5. doi:10.1155/2014/676108
BibTeX
@article{Liao2014,
author = {Liao, Wei and Zhang, Chuanchao and Sun, Xiaofen and Zhang, Lijuan and Yuan, Xiaodong},
title = {Full Aperture CO 2 Laser Process to Improve Laser Damage Resistance of Fused Silica Optical Surface},
journal = {Advances in Condensed Matter Physics},
year = {2014},
volume = {2014},
pages = {1--5},
doi = {10.1155/2014/676108}
}
EUVIMED