EUVIMEDEUVIMED entdecken
Open Access · CC BY 3.0

Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee

Marjan Bahraminasab iD, Ali Jahan, Barkawi Sahari iD, Manohar Arumugam, Mahmoud Shamsborhan iD, Mohd Roshdi Hassan

Journal of Medical Engineering · 2013

DOI: 10.1155/2013/891759 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Medical Engineering, 2013. Verfasst von Marjan Bahraminasab und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 Selangor, Malaysia. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Contact pressure in the knee joint is a key element in the mechanisms of knee pain and osteoarthritis. Assessing the contact pressure in tibiofemoral joint is a challenging mechanical problem due to uncertainty in material properties. In this study, a sensitivity analysis of tibiofemoral peak contact pressure to the material properties of the soft tissue was carried out through fractional factorial and Box-Behnken designs. The cartilage was modeled as linear elastic material, and in addition to its elastic modulus, interaction effects of soft tissue material properties were added compared to previous research. The results indicated that elastic modulus of the cartilage is the most effective factor. Interaction effects of axial/radial modulus with elastic modulus of cartilage, circumferential and axial/radial moduli of meniscus were other influential factors. Furthermore this study showed how design of experiment methods can help designers to reduce the number of finite element analyses and to better interpret the results.

Autor:innen und Institutionen

  • Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 Selangor, Malaysia.
  • Faculty of Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran.
  • Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 Selangor, Malaysia; Institute of Advanced Technology, ITMA, Universiti Putra Malaysia, Selangor, Malaysia.
  • Department of Orthopedic Surgery, Faculty of Medicine & Health Science, Universiti Putra Malaysia, Selangor, Malaysia.
  • Department of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran.

ORCID-Profile: Marjan Bahraminasab, Barkawi Sahari, Mahmoud Shamsborhan

Zitieren

APA

Bahraminasab, M., Jahan, A., Sahari, B., Arumugam, M., Shamsborhan, M., & Hassan, M. R. (2013). Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee. Journal of Medical Engineering. https://doi.org/10.1155/2013/891759

Vancouver

Bahraminasab M, Jahan A, Sahari B, Arumugam M, Shamsborhan M, Hassan MR. Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee. Journal of Medical Engineering. 2013. doi:10.1155/2013/891759

BibTeX
@article{Bahraminasab2013,
  author = {Bahraminasab, Marjan and Jahan, Ali and Sahari, Barkawi and Arumugam, Manohar and Shamsborhan, Mahmoud and Hassan, Mohd Roshdi},
  title = {Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee},
  journal = {Journal of Medical Engineering},
  year = {2013},
  doi = {10.1155/2013/891759}
}
Kostenlos starten →