EUVIMEDEUVIMED entdecken
Open Access · CC BY 3.0

Design and Parameter Study of a Self-Compensating Hydrostatic Rotary Bearing

Xiaobo Zuo, Shengyi Li, Ziqiang Yin, Jianmin Wang

International Journal of Rotating Machinery · 2013 · 2013 · 1-10

DOI: 10.1155/2013/638193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Rotating Machinery, 2013. Verfasst von Xiaobo Zuo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 3.0). Gefördert von: National Natural Science Foundation of China, National Major Project of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of design parameters on the static performance of a newly designed self-compensating hydrostatic rotary bearing was investigated. The bearing was designed by incorporating the main attributes of angled-surface self-compensating bearing and opposed-pad self-compensating bearing. A governing model based on flow conservation was built to theoretically study the static performance, and the methodology was validated by experiments. It is pointed out that the influence factors on the bearing static performance are the designed resistance ratio of the restricting land to the bearing land, the inner resistance ratio of the land between pockets to that between the pocket and the drain groove, the initial clearance ratio of the restricting gap to the bearing gap, and the semiconical angle. Their effects on the load carrying capacity and stiffness were investigated by simulation. Results show that the optimum designed resistance ratio is 1; the initial clearance ratio should be small, and the inner resistance ratio should be large.

Förderung

  • National Natural Science Foundation of China
  • National Major Project of Science and Technology

Zitieren

APA

Zuo, X., Li, S., Yin, Z., & Wang, J. (2013). Design and Parameter Study of a Self-Compensating Hydrostatic Rotary Bearing. International Journal of Rotating Machinery, 2013, 1-10. https://doi.org/10.1155/2013/638193

Vancouver

Zuo X, Li S, Yin Z, Wang J. Design and Parameter Study of a Self-Compensating Hydrostatic Rotary Bearing. International Journal of Rotating Machinery. 2013;2013:1-10. doi:10.1155/2013/638193

BibTeX
@article{Zuo2013,
  author = {Zuo, Xiaobo and Li, Shengyi and Yin, Ziqiang and Wang, Jianmin},
  title = {Design and Parameter Study of a Self-Compensating Hydrostatic Rotary Bearing},
  journal = {International Journal of Rotating Machinery},
  year = {2013},
  volume = {2013},
  pages = {1--10},
  doi = {10.1155/2013/638193}
}
Kostenlos starten →