EUVIMEDEUVIMED entdecken
Open Access · CC BY 3.0

Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions

K. W. Cheah, T. S. Lee, S. H. Winoto, Z. M. Zhao

International Journal of Rotating Machinery · 2007 · 2007 · 1-8

DOI: 10.1155/2007/83641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Rotating Machinery, 2007. Verfasst von K. W. Cheah und 3 weiteren Autor:innen. Die Arbeit wurde bisher 75-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current investigation is aimed to simulate the complex internal flow in a centrifugal pump impeller with six twisted blades by using a three-dimensional Navier-Stokes code with a standard k - ε two-equation turbulence model. Different flow rates were specified at inlet boundary to predict the characteristics of the pump. A detailed analysis of the results at design load, Q design , and off-design conditions, Q = 0.43 Q design and Q = 1.45 Q design , is presented. From the numerical simulation, it shows that the impeller passage flow at design point is quite smooth and follows the curvature of the blade. However, flow separation is observed at the leading edge due to nontangential inflow condition. The flow pattern changed significantly inside the volute as well, with double vortical flow structures formed at cutwater and slowly evolved into a single vortical structure at the volute diffuser. For the pressure distribution, the pressure increases gradually along streamwise direction in the impeller passages. When the centrifugal pump is operating under off-design flow rate condition, unsteady flow developed in the impeller passage and the volute casing.

Zitieren

APA

Cheah, K. W., Lee, T. S., Winoto, S. H., & Zhao, Z. M. (2007). Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions. International Journal of Rotating Machinery, 2007, 1-8. https://doi.org/10.1155/2007/83641

Vancouver

Cheah KW, Lee TS, Winoto SH, Zhao ZM. Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions. International Journal of Rotating Machinery. 2007;2007:1-8. doi:10.1155/2007/83641

BibTeX
@article{Cheah2007,
  author = {Cheah, K. W. and Lee, T. S. and Winoto, S. H. and Zhao, Z. M.},
  title = {Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions},
  journal = {International Journal of Rotating Machinery},
  year = {2007},
  volume = {2007},
  pages = {1--8},
  doi = {10.1155/2007/83641}
}
Kostenlos starten →