Carbon Nanotube-Driven Strategy for Dry-Processed High-Performance Thick Electrodes in Lithium-Ion Batteries
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (8) · 734-734
DOI: 10.1149/ma2026-018734mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Jung-Keun Yoo.
Abstract (Originalsprache)
To enhance the energy density and cost-competitiveness of lithium-ion batteries (LIBs), dry-processed thick electrodes have emerged as a critical manufacturing strategy. While dry processing enables the fabrication of high-loading electrodes (> 8 mAh/cm2), significant material and processing challenges remain. From a material perspective, incorporating Carbon Nanotubes (CNTs) with high specific surface areas (SSA) and aspect ratios is essential for establishing robust electrical networks at low concentrations. However, conventional dry mixing of nanoparticulate CNTs is hindered by poor dispersibility and powder flowability. Furthermore, achieving rapid and uniform PTFE fibrillation and ensuring the homogeneous distribution of conductive agents and binders are vital for electrode integrity. In this study, we developed an integrated active material-CNT-binder composite via a spray-drying process, where small-grain NCM active materials were pre-mixed with highly dispersed CNT suspensions. By controlling spray-drying parameters such as temperature, gas flow, and feeding rate, we engineered the size and morphology of the resulting secondary-particle composites. The application of these tens-of-micrometer-sized composites to the dry process significantly improved powder flowability and reduced the specific surface area, allowing for a substantial reduction in PTFE binder content—a major resistive component in thick electrodes. Notably, the CNTs situated on the active material surface interacted with the PTFE to accelerate fibrillation, enhancing the rheological properties and overall processability during the kneading stage. Consequently, we successfully reduced the required PTFE content (by ~ 25%) while improving electrical conductivity through the integrated CNT networks. This CNT-driven strategy provides a comprehensive solution to simultaneously advance the energy density, electrochemical performance, and manufacturability of LIBs.
Zitieren
APA
Yoo, J. (2026). Carbon Nanotube-Driven Strategy for Dry-Processed High-Performance Thick Electrodes in Lithium-Ion Batteries. ECS Meeting Abstracts, MA2026-01(8), 734-734. https://doi.org/10.1149/ma2026-018734mtgabs
Vancouver
Yoo J. Carbon Nanotube-Driven Strategy for Dry-Processed High-Performance Thick Electrodes in Lithium-Ion Batteries. ECS Meeting Abstracts. 2026;MA2026-01(8):734-734. doi:10.1149/ma2026-018734mtgabs
BibTeX
@article{Yoo2026,
author = {Yoo, Jung-Keun},
title = {Carbon Nanotube-Driven Strategy for Dry-Processed High-Performance Thick Electrodes in Lithium-Ion Batteries},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {8},
pages = {734--734},
doi = {10.1149/ma2026-018734mtgabs}
}
EUVIMED