EUVIMEDEUVIMED entdecken
Crossref

Coupled Learning–Adoption Modeling with Cost Floor Constraints for Realistic Cost Projections of Flow Batteries

Xiaoxu Fu, Matthew E Riddle, Alinson Santos Xavier, Kavitha G Menon, Kevin W. Knehr, Zoushuang Li, Chukwunwike O. Iloeje

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (7) · 2834-2834

DOI: 10.1149/ma2026-0172834mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Xiaoxu Fu und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate cost projections for emerging energy storage technologies require a consistent treatment of the interdependence between technological learning and market adoption. Conventional techno-economic analyses often rely on simplified experience curves, such as Wright’s law, which assume continuous cost decline with cumulative production. However, such approaches neglect two critical realities: (i) cost reductions are physically and economically bonded by material and manufacturing constraints, and (ii) cumulative deployment itself is governed by market adoption dynamics, which are influenced by cost competitiveness. As a result, uncoupled or unconstrained models can lead to unrealistic long-term projections and misinformed policy or investment decisions. In this work, we have developed a refined learning–adoption modeling framework that explicitly captures the iterative coupling between cost evolution and market diffusion. The framework is combined with the Battery Performance and Cost model for Flow Batteries (BatPaC-Flow), a bottom-up techno-economic model developed at Argonne, to estimate the cost and commercialization rate for redox flow batteries. The framework integrates component-level learning curves, system-level cost aggregation, and a Bass-diffusion-based adoption model, enabling iterative feedback between deployment and cost reduction. This coupled formulation reflects the fundamental insight that cost declines only occur through deployment, while adoption itself is constrained by cost trajectories and competition with alternative technologies. A key refinement of this work, beyond state-of-the-art of learning curves, is the introduction of physically grounded cost floors 1 . Unlike conventional experience curve models that allow indefinite cost decline, we impose lower bounds derived from raw material and precursor costs, calculated via stoichiometric relationships and representative process routes. In addition, fixed manufacturing cost components are incorporated as non-learning fractions to account for irreducible process expenses. These refinements prevent unrealistic extrapolation and ensure that projected cost trajectories remain consistent with supply chain and thermodynamic constraints. Results show that both mineral-based and manufacturing-based floors significantly alter long-term cost projections by imposing asymptotic limits on system-level cost reductions, particularly for main cost drivers such as vanadium electrolytes. At the component level, learning rates are systematically assigned based on technology-inherent characteristics, specifically design complexity and need for customization 2 , assigned by stakeholders and experts via interviews and questionnaires. Components that are highly standardized and modular exhibit faster cost declines, while those requiring extensive engineering iteration or site-specific adaptation demonstrate slower learning. This classification enables a more mechanistic and transparent mapping between technology attributes and experience rates, improving the fidelity of bottom-up cost projections and avoiding arbitrary or uniform learning rate assumptions. On the adoption side, we have refined the Bass diffusion model parameters to better represent the deployment dynamics of flow batteries in stationary energy storage markets. The innovation coefficient and imitation coefficient are first calibrated using lithium-ion battery deployment data (from year 2009 to 2024) 3 as an empirical anchor, through nonlinear least-squares fitting. These parameters are then adjusted to reflect flow battery–specific characteristics, including technology maturity, policy drivers, and expected market segmentation. In this framework, the innovation parameter primarily governs the timing of market takeoff, while the imitation parameter controls the rate of adoption acceleration. Furthermore, we have introduced a cost sensitivity parameter to explicitly capture how cost competitiveness relative to alternative technologies influences adoption rates, as well as incorporate constraints on total addressable market size. The resulting framework establishes a fully coupled, iterative system in which cost trajectories and adoption pathways co-evolve. System-level cost projections are dynamically updated based on cumulative installed capacity derived from the adoption model, while adoption rates respond to evolving cost competitiveness. This feedback loop enables more realistic projections of both cost reduction timelines and market penetration, compared to traditional one-directional models. Application of the framework to representative flow battery systems demonstrates that incorporating cost floors and adoption coupling can significantly delay or limit projected cost reductions, while also shifting adoption timelines. For example, scenarios that neglect cost floors may overestimate long-term cost reductions, whereas coupled models reveal more gradual and bounded cost declines, with adoption trajectories strongly dependent on early-stage cost competitiveness and policy-driven innovation effects. The approach is broadly applicable to other emerging technologies where cost and deployment are tightly coupled, such as electrochemical systems and separation technologies. References (1) Yao, A.; Benson, S. M.; Chueh, W. C. Critically assessing sodium-ion technology roadmaps and scenarios for techno-economic competitiveness against lithium-ion batteries. Nature Energy 2025 , 10 (3), 404–416. DOI: 10.1038/s41560-024-01701-9. (2) Sievert, K.; Schmidt, T. S.; Steffen, B. Considering technology characteristics to project future costs of direct air capture. Joule 2024 , 8 (4), 979–999. DOI: 10.1016/j.joule.2024.02.005. (3) Administration, U. S. E. I. 2024 Battery Storage Figures, 2024 Form EIA-860, Annual Electric Generator Report ; 2023.

Zitieren

APA

Fu, X., Riddle, M. E., Xavier, A. S., Menon, K. G., Knehr, K. W., Li, Z., & Iloeje, C. O. (2026). Coupled Learning–Adoption Modeling with Cost Floor Constraints for Realistic Cost Projections of Flow Batteries. ECS Meeting Abstracts, MA2026-01(7), 2834-2834. https://doi.org/10.1149/ma2026-0172834mtgabs

Vancouver

Fu X, Riddle ME, Xavier AS, Menon KG, Knehr KW, Li Z, et al. Coupled Learning–Adoption Modeling with Cost Floor Constraints for Realistic Cost Projections of Flow Batteries. ECS Meeting Abstracts. 2026;MA2026-01(7):2834-2834. doi:10.1149/ma2026-0172834mtgabs

BibTeX
@article{Fu2026,
  author = {Fu, Xiaoxu and Riddle, Matthew E and Xavier, Alinson Santos and Menon, Kavitha G and Knehr, Kevin W. and Li, Zoushuang and Iloeje, Chukwunwike O.},
  title = {Coupled Learning–Adoption Modeling with Cost Floor Constraints for Realistic Cost Projections of Flow Batteries},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {7},
  pages = {2834--2834},
  doi = {10.1149/ma2026-0172834mtgabs}
}
Kostenlos starten →