EUVIMEDEUVIMED entdecken
Crossref

Defect and Phase-Controlled Lanthanum Vanadate as a High-Rate Anode Toward Fast-Charging Lithium-Ion Batteries

Eunyoung Cho, Hyun-Kon Song

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 573-573

DOI: 10.1149/ma2026-014573mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Eunyoung Cho und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid expansion of fast-charging lithium-ion batteries is driven by electric vehicles, portable electronics, and energy storage systems, where minimizing charging downtime while maintaining durability has become a critical requirement. To meet these demands, extensive efforts have been devoted to high-rate anode materials, including graphite optimization, alloy-based anodes, and oxide-based insertion materials. In particular, pseudocapacitive oxides such as Nb₂O₅ have demonstrated exceptional rate capability by mitigating diffusion limitations through fast surface or near-surface redox processes. However, these materials typically operate at intrinsically high potentials (≈1.6–2.0 V vs. Li/Li⁺), leading to compromised cell-level energy density and strong dependence on complex structural and defect control. Graphite, while offering low operating potential and high energy density, suffers from sluggish kinetics and lithium plating risks under aggressive fast-charging conditions. These limitations highlight the need for alternative anode chemistries that balance kinetics, operating potential, and practical durability. To overcome kinetic bottlenecks, prior studies have focused on particle downsizing, porous architecture, conductive coatings, and heterostructure design to shorten diffusion pathways and reduce charge-transfer resistance. Defect engineering, including oxygen vacancy introduction and mixed-valence control, has emerged as an effective strategy to enhance electronic conductivity and interfacial charge-transfer kinetics in oxide anodes. Electrolyte engineering and artificial interphases have also been explored to stabilize electrode–electrolyte interfaces under high current densities. Despite these advances, many reported high-rate performances rely on aggressive nanostructuring or narrow synthesis windows, raising concerns regarding scalability, reproducibility, and long-term stability at practically relevant current densities. From these perspectives, practical high-rate anodes should satisfy several general requirements: (i) operation within a moderate potential window that is sufficiently high to mitigate lithium plating while avoiding excessive energy penalties; (ii) kinetically favorable charge-storage behavior that alleviates diffusion limitations under high current densities; (iii) electronic structures that support efficient charge transfer without reliance on extreme nanostructuring; and (iv) robust electrode–electrolyte interfaces capable of sustaining stable operation under practical fast-charging conditions. Herein, lanthanum vanadate (LaVO 4- ₓ) is investigated as a defect-engineered oxide anode material. The optimized LaVO 4- ₓ was synthesized under optimized vacuum conditions. X-ray diffraction confirms a mixed-phase LaVO₄/LaVO₃ composition without detectable impurity phases. X-ray photoelectron spectroscopy indicates mixed vanadium oxidation states and defect-modulated electronic structure, and these mixed states also confirm the reversible redox activity during electrochemical cycling. Oxygen-vacancy-related features further support defect formation induced by vacuum synthesis. Such mixed-phase and defect characteristics are expected to facilitate electronic transport and interfacial charge-transfer processes, providing a structural basis for enhanced electrochemical kinetics. Cyclic voltammetry reveals pronounced kinetic enhancement in LaVO 4- ₓ. The extracted b-values approach 0.8–1.0 during cathodic scans, indicating substantial capacitive-like charge-storage behavior. The half-cell voltage profiles exhibit a continuous sloping behavior with a capacity-weighted average operating potential of approximately 1.0 ± 0.2 V vs. Li/Li⁺, avoiding deep low-voltage plateaus that are prone to lithium plating. Galvanostatic electrochemical impedance spectroscopy shows consistently reduced charge-transfer resistance, confirming facilitated interfacial kinetics. In Li-metal half cells, the LaVO 4- ₓ anode exhibits excellent durability under high-rate operation. The electrode maintains stable cycling over 1000 cycles, delivering approximately 275 mAh g⁻¹ at 3C and 150 mAh g⁻¹ at 6C. The absence of abrupt capacity decay under sustained high current densities indicates intrinsically stable charge storage behavior enabled by the defect-modulated oxide framework. These electrochemical characteristics collectively demonstrate that favorable kinetics and long-term durability can be achieved simultaneously in oxide anodes. This study highlights defect-engineered vanadate oxides as a promising anode platform that bridges the gap between diffusion-limited graphite and high-potential oxide anodes commonly explored for high-rate lithium storage. The combination of a moderate operating potential, mixed-valence redox activity, and stable interfacial kinetics enables LaVO 4- ₓ to maintain long-term cyclability under elevated current densities. These results suggest that rational control of phase composition and defect chemistry is an effective pathway for balancing electrochemical kinetics and durability in oxide anodes. More broadly, this work highlights the potential of vanadate oxides as practical high-rate anode platforms and provides guidance for designing oxide-based electrodes that operate reliably under fast-charging conditions.

Zitieren

APA

Cho, E., & Song, H. (2026). Defect and Phase-Controlled Lanthanum Vanadate as a High-Rate Anode Toward Fast-Charging Lithium-Ion Batteries. ECS Meeting Abstracts, MA2026-01(4), 573-573. https://doi.org/10.1149/ma2026-014573mtgabs

Vancouver

Cho E, Song H. Defect and Phase-Controlled Lanthanum Vanadate as a High-Rate Anode Toward Fast-Charging Lithium-Ion Batteries. ECS Meeting Abstracts. 2026;MA2026-01(4):573-573. doi:10.1149/ma2026-014573mtgabs

BibTeX
@article{Cho2026,
  author = {Cho, Eunyoung and Song, Hyun-Kon},
  title = {Defect and Phase-Controlled Lanthanum Vanadate as a High-Rate Anode Toward Fast-Charging Lithium-Ion Batteries},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {4},
  pages = {573--573},
  doi = {10.1149/ma2026-014573mtgabs}
}
Kostenlos starten →