( Invited ) Bridging Processing and Interfaces: Scalable Sulfide Processing and Operando Interface Diagnostics for High-Energy All-Solid-State Batteries
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 538-538
DOI: 10.1149/ma2026-014538mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Guang Yang und 3 weiteren Autor:innen.
Abstract (Originalsprache)
All-solid-state batteries (ASSBs) can enable higher energy density and improved safety, but translation is often limited by pellet-based architectures and by solid–solid interfaces where chemo-mechanical evolution is tightly coupled. This talk connects scalable processing to interfacial physics using wet/dry manufacturing routes, operando Raman/neutron diagnostics, and predictive transport/kinetics modeling for sulfide ASSBs—aligned with DOE priorities in next-generation energy storage and domestic manufacturing scale-up. We first demonstrate manufacturable, thin, flexible sulfide solid-state electrolyte (SSE) sheets via slurry casting of argyrodite particles (e.g., Li₆PS₅Cl), using Hansen-parameter-guided solvent selection and low-binder formulations to retain mechanical integrity. These free-standing SSE films preserve ionic pathways while reducing thickness and areal specific resistance, enabling scalable cell assembly. Building on this platform, we show that co-optimizing wet/dry electrode processing and stack design enables high single-layer energy density without reverting to pellet cells. Pairing thin sulfide SSE sheets with microsized, cost-effective silicon anodes delivers stable single-layer cells approaching ~400 Wh kg⁻¹ and identifies key scale-up levers (uniformity, percolation/connectivity, binder distribution, and interface design). To accelerate high-Ni composite cathode down-selection, we present a catholyte prescreening and formation-engineering framework. We show that voltage-hold “passivation” can be detrimental in sulfide ASSBs, whereas controlled current conditioning better stabilizes the cathode–electrolyte interphase (CEI). Finally, we couple operando Raman imaging with neutron radiography/tomography to quantify interphase evolution, lithium redistribution, and contact loss across length scales, and we connect these observations to prediction using TWIF-Li (a non-empirical transport framework linking tortuosity to interfacial flux with GITT-derived diffusion). Data-driven analysis of Raman hyperspectral maps (UMAP + k-means) further quantifies interphase heterogeneity and enables consistent, actionable comparisons across processing, catholyte, and formation conditions—closing the loop from manufacturing knobs to transport limits and cell-level energy density.
Zitieren
APA
Yang, G., Kim, C., Adam, A., & Li, Y. (2026). ( Invited ) Bridging Processing and Interfaces: Scalable Sulfide Processing and Operando Interface Diagnostics for High-Energy All-Solid-State Batteries. ECS Meeting Abstracts, MA2026-01(4), 538-538. https://doi.org/10.1149/ma2026-014538mtgabs
Vancouver
Yang G, Kim C, Adam A, Li Y. ( Invited ) Bridging Processing and Interfaces: Scalable Sulfide Processing and Operando Interface Diagnostics for High-Energy All-Solid-State Batteries. ECS Meeting Abstracts. 2026;MA2026-01(4):538-538. doi:10.1149/ma2026-014538mtgabs
BibTeX
@article{Yang2026,
author = {Yang, Guang and Kim, Chanho and Adam, Andre and Li, Yuanshun},
title = {( Invited ) Bridging Processing and Interfaces: Scalable Sulfide Processing and Operando Interface Diagnostics for High-Energy All-Solid-State Batteries},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {4},
pages = {538--538},
doi = {10.1149/ma2026-014538mtgabs}
}
EUVIMED