EUVIMEDEUVIMED entdecken
Crossref

Processing-Conductivity Relationships in Thin-Film Li 3-x OH x Cl Antiperovskite Solid Electrolytes

Kai-Wei Lan, En Ju Cho, Yi-Ting Lee, David G. Cahill, Nicola H. Perry

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 526-526

DOI: 10.1149/ma2026-014526mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Kai-Wei Lan und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Li 3-x OH x Cl compositions are intriguing battery solid electrolyte candidates, given their stability vs. Li metal anodes, mechanical compliance, and low melting points. These properties may enable high energy density, low stack pressure, and low-temperature manufacturing, respectively. Given modest Li-ion conductivities (~10 -3 mS/cm at 25 °C), their most compelling use may be in the form of thin functional layers, particularly at the anode side or in microdevices. Therefore, it is important to understand how the conductivity of thin films compares to that of bulk antiperovskites and how the film processing conditions affect the structure and transport behavior. Here we apply air-free pulsed laser deposition (PLD) with both in-situ and ex-situ impedance spectroscopy, XRD, SEM-EDS, and nuclear reaction analysis to investigate how target composition, laser fluence, and substrate temperature correlate to film composition, structure, and in-plane conductivity. Room-temperature-grown films exhibit the highest conductivities, antiperovskite phase, high Li/Cl ratios, and chemical homogeneity. Increasing deposition temperature or post-annealing decreases the Li/Cl ratio, increases LiCl phase fraction and compositional heterogeneity, and lowers conductivity. In-situ impedance measurements during film growth provide insight into how substrate temperature affects film formation. Ultimately, the ability to prepare pure antiperovskite films at room temperature with comparable conductivity to bulk cubic pellets, using carefully engineered PLD targets, encourages further investigation of their low-temperature manufacturing with scalable processes.

Zitieren

APA

Lan, K., Cho, E. J., Lee, Y., Cahill, D. G., & Perry, N. H. (2026). Processing-Conductivity Relationships in Thin-Film Li 3-x OH x Cl Antiperovskite Solid Electrolytes. ECS Meeting Abstracts, MA2026-01(4), 526-526. https://doi.org/10.1149/ma2026-014526mtgabs

Vancouver

Lan K, Cho EJ, Lee Y, Cahill DG, Perry NH. Processing-Conductivity Relationships in Thin-Film Li 3-x OH x Cl Antiperovskite Solid Electrolytes. ECS Meeting Abstracts. 2026;MA2026-01(4):526-526. doi:10.1149/ma2026-014526mtgabs

BibTeX
@article{Lan2026,
  author = {Lan, Kai-Wei and Cho, En Ju and Lee, Yi-Ting and Cahill, David G. and Perry, Nicola H.},
  title = {Processing-Conductivity Relationships in Thin-Film Li 3-x OH x Cl Antiperovskite Solid Electrolytes},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {4},
  pages = {526--526},
  doi = {10.1149/ma2026-014526mtgabs}
}
Kostenlos starten →