Towards High Power All-Iron Redox Flow Batteries Using Surfactant-Enhanced Slurry Electrodes
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (43) · 2204-2204
DOI: 10.1149/ma2026-01432204mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Ameya Bondre und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Redox flow batteries (RFBs) offer a promising solution for long-duration energy storage owing to their scalable design and decoupled power–energy architecture. While commercial RFBs predominantly employ vanadium-based chemistries, there is increasing interest in alternative chemistries that utilize earth-abundant and low cost materials, including iron [1] . Conventional aqueous all-iron redox flow batteries (AIRFBs) employ Fe(II)/Fe(III) redox couple at the positive electrode, where the reactions take place in liquid form. Whereas the Fe(II)/Fe redox couple which undergoes phase transformation via plating/stripping reactions is used on the negative side [2] . Given that the amount of iron plated depends on accessible pore volume of the electrode, it ultimately limits the battery capacity and prevents power-energy decoupling [3] . To overcome these limitations, we look towards flowable electrodes that enable continuous recirculation of plated material through the flow cell and electrolyte tanks. Flowable electrodes comprising colloidal suspensions of conductive carbon particles substantially enhance the surface area available for metal plating and stripping reactions [4] . However, the high viscosity of these carbon slurries raises pumping costs, potentially making them uneconomical for commercial use. This creates an opportunity to enhance slurry electrodes by pairing strong electrochemical performance with desirable rheological properties [5] . In this work, we demonstrate that incorporation of surfactants like Triton X-100 to slurry electrodes boosts electrochemical performance and lowers pumping requirements of AIRFBs. We first determine the critical micelle concentration of the surfactant in slurry electrodes. Subsequently, we characterize the electronic conductivity and electrochemical surface area of the carbon-surfactant suspensions. We assess the rheological properties of these slurry electrodes and the resulting pressure drop in a flow cell. Further, we employ cyclic voltammetry to study the redox behavior of the surfactant and interactions with the electrolyte. We then perform flow cell experiments, polarization and galvanostatic cycling, to study the influence of slurry formulation on battery performance, cell overpotentials and lifetime. Finally, we examine the changes in pressure drop during battery cycling, which gives further insight into the hydraulic loss and its implications on operational viability of slurry electrodes. Overall, we find that surfactant-enhanced slurry electrodes boost the power density and lifetime of AIRFBs. Through this systematic research, we seek to elucidate the relationships among formulation parameters, physicochemical properties, and electrochemical performance metrics of surfactant-enhanced slurry electrodes. References (1) Belongia, S.; Wang, X.; Zhang, X. Progresses and Perspectives of All‐Iron Aqueous Redox Flow Batteries. Advanced Functional Materials 2023 , 34 (5). https://doi.org/10.1002/adfm.202302077. (2) Hruska, L. W.; Savinell, R. F. Investigation of Factors Affecting Performance of the Iron‐Redox Battery. Journal of The Electrochemical Society 1981 , 128 (1), 18–25. https://doi.org/10.1149/1.2127366. (3) Hawthorne, K. L.; Petek, T. J.; Miller, M. A.; Wainright, J. S.; Savinell, R. F. An Investigation into Factors Affecting the Iron Plating Reaction for an All-Iron Flow Battery. Journal of the Electrochemical Society 2014 , 162 (1), A108–A113. https://doi.org/10.1149/2.0591501jes. (4) Petek, T. J.; Hoyt, N. C.; Savinell, R. F.; Wainright, J. S. Slurry Electrodes for Iron Plating in an All-Iron Flow Battery. Journal of Power Sources 2015 , 294 , 620–626. https://doi.org/10.1016/j.jpowsour.2015.06.050. (5) Das, M.; Lee, K.; Wirth, C. L. Surfactant-Driven Dynamic Changes in Rheology of Activated Carbon Slurry Electrodes. ACS Applied Materials & Interfaces 2024 , 16 (32), 42049–42058. https://doi.org/10.1021/acsami.4c04935.
Zitieren
APA
Bondre, A., Boz, E. B., Alicke, A., & Forner-Cuenca, A. (2026). Towards High Power All-Iron Redox Flow Batteries Using Surfactant-Enhanced Slurry Electrodes. ECS Meeting Abstracts, MA2026-01(43), 2204-2204. https://doi.org/10.1149/ma2026-01432204mtgabs
Vancouver
Bondre A, Boz EB, Alicke A, Forner-Cuenca A. Towards High Power All-Iron Redox Flow Batteries Using Surfactant-Enhanced Slurry Electrodes. ECS Meeting Abstracts. 2026;MA2026-01(43):2204-2204. doi:10.1149/ma2026-01432204mtgabs
BibTeX
@article{Bondre2026,
author = {Bondre, Ameya and Boz, Emre Burak and Alicke, Alexandra and Forner-Cuenca, Antoni},
title = {Towards High Power All-Iron Redox Flow Batteries Using Surfactant-Enhanced Slurry Electrodes},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {43},
pages = {2204--2204},
doi = {10.1149/ma2026-01432204mtgabs}
}
EUVIMED