EUVIMEDEUVIMED entdecken
Crossref

Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery

Preetam Sharma, Ali Vala Mizrak, Zakerie A. Hubbs, Gabriel Goenaga, Douglas S Aaron, Thomas A. Zawodzinski, Matthew M. Mench

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (43) · 2202-2202

DOI: 10.1149/ma2026-01432202mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Preetam Sharma und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal–air batteries offer substantially higher theoretical energy density than Li-ion batteries, rendering them suitable for stationary storage and advanced mobility applications, including eVTOL aircraft. Aluminum–air (Al–air) batteries are especially promising due to the natural abundance of Al and a theoretical energy density of approximately 8.1 kWh kg⁻¹, along with a specific capacity of about 2.9 Ah g⁻¹ [1]. This study presents a novel, membrane-less, mechanically rechargeable Al–air flow battery that integrates enhanced electrolyte and gas management using a flow-engineered architecture. The shallow electrolyte channel ensures even electrolyte (KOH) distribution and mitigates local corrosion, while the forced-convection cathode enhances oxygen transport to the catalyst layer. In 5 cm² prototypes operated at 70 °C, this configuration achieves an unprecedented 1.72 W cm⁻² at 0.75 V with pure oxygen and about 0.67 W cm⁻² at 1.12 V with air (shown in Figure 1), indicating ultrahigh-power output, exceeding known values demonstrated in the literature by at least a factor of three [2]. A comprehensive investigation was conducted to determine how operating conditions and cathode architecture influence the performance of membrane-less Al–air flow battery. Systematic variations in electrolyte flow rate, cell temperature, oxidizer type (pure oxygen and air), and oxidizer flow rate were implemented to quantify their individual and combined effects on mass transport, reaction kinetics, and parasitic corrosion, as assessed by electrochemical impedance spectroscopy (EIS). Furthermore, multiple gas diffusion layers (GDLs) with varying thicknesses, pore structures, microporous layer (MPL) configurations, and PTFE loadings were examined to assess how cathode transport resistance and wettability affect power output under different operating conditions. The resulting dataset establishes performance scaling laws and GDL selection guidelines for high-power Al–air operation across a broad design space, demonstrating that the flow-engineered, membrane-less architecture sustains robust, air-breathing performance even under oxidizer-limited, low-flow, or high/low-temperature scenarios. References: [1] R. Mori, “Recent Developments for Aluminum–Air Batteries,” Electrochemical Energy Reviews , vol. 3, no. 2. Springer Science and Business Media B.V., pp. 344–369, 2020. doi: 10.1007/s41918-020-00065-4. [2] H. Wen, Z. Liu, J. Qiao, R. Chen, R. Zhao, J. Wu, G. Qiao, and J. Yang, “High energy efficiency and high power density aluminum-air flow battery,” Int J Energy Res , vol. 44, no. 9, pp. 7568–7579, Jul. 2020, doi: 10.1002/er.5485. Figure 1

Zitieren

APA

Sharma, P., Mizrak, A. V., Hubbs, Z. A., Goenaga, G., Aaron, D. S., Zawodzinski, T. A., & Mench, M. M. (2026). Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery. ECS Meeting Abstracts, MA2026-01(43), 2202-2202. https://doi.org/10.1149/ma2026-01432202mtgabs

Vancouver

Sharma P, Mizrak AV, Hubbs ZA, Goenaga G, Aaron DS, Zawodzinski TA, et al. Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery. ECS Meeting Abstracts. 2026;MA2026-01(43):2202-2202. doi:10.1149/ma2026-01432202mtgabs

BibTeX
@article{Sharma2026,
  author = {Sharma, Preetam and Mizrak, Ali Vala and Hubbs, Zakerie A. and Goenaga, Gabriel and Aaron, Douglas S and Zawodzinski, Thomas A. and Mench, Matthew M.},
  title = {Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {43},
  pages = {2202--2202},
  doi = {10.1149/ma2026-01432202mtgabs}
}
Kostenlos starten →