Electrode and Electrocatalyst Screening for a Polysulfide-Ferri/Ferrocyanide Flow Battery
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (43) · 2194-2194
DOI: 10.1149/ma2026-01432194mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Maedeh Pahlevaninezhad und 7 weiteren Autor:innen.
Abstract (Originalsprache)
The development of efficient and cost-effective energy storage systems is crucial for addressing the intermittency of renewable energy sources. Flow batteries (FBs) are promising candidates for low-cost, large-scale energy storage due to their scalability, long cycle life, and unique capability to decouple power and energy [1-2]. Among the different redox chemistries, the combination of low-cost and abundant polysulfide and ferri/ferrocyanide may enable cost-competitive embodiments; however, the power of such systems is limited by sluggish polysulfide reaction kinetics that result in large polarization losses and low roundtrip efficiencies [3-4]. While the ferri/ferrocyanide redox couple exhibits relatively well-defined electrochemical behavior, the complex multi-electron, multi-species nature of polysulfide redox reactions leads to slow charge-transfer rates, surface passivation, and significant sensitivity to electrode surface chemistry. Thus, electrode and electrocatalyst design is key [4]. Despite emerging reports of improved performance using transition metal sulfides [5-7], transition-metal compounds, and heteroatom-doped carbons, a systematic understanding of how catalyst composition, surface functionality, electrode microstructure connect to cell behavior remains limited. In this presentation, we compare the electrocatalytic activity of metal sulfide catalysts (FeS, NiS, CuS, and ZnS) deposited onto porous carbon electrodes using the Successive Ionic Layer Adsorption and Reaction (SILAR) technique. Performance was evaluated in a custom-built flow cell with a reference electrode, enabling assessment of individual electrode performance under operating conditions that mimic larger-scale systems. An initial substrate screening step was used to identify suitable carbon electrodes for catalyst deposition. Scanning electron microscopy (SEM) was employed to assess coating morphology and uniformity, while energy-dispersive X-ray spectroscopy (EDS) mapping was used to evaluate phase distribution and elemental homogeneity. Electrolyte stability and catalyst durability were investigated through galvanostatic cycling of a polysulfide – ferri/ferrocyanide flow battery in both three- and two-electrode configurations. The results demonstrate that metal sulfide catalysts can significantly enhance polysulfide redox kinetics [1, 5, 7], with the greatest improvement observed for the polysulfide reduction reaction, leading to higher energy efficiency and improved long-term operational stability. Collectively, these findings provide critical insights into electrode and electrocatalyst design for higher-performance polysulfide–based flow batteries and further aqueous polysulfides as a candidate electrolyte. [1] L. Yi., Y. Luo., and X. Mou., Carbon felt modified with copper sulfide nanoflowers as a high-performance electrode for polysulfide–ferrocyanide redox flow batteries, J Mater Sci (2025) 60:10026–10037. [2] J.J. Bailey, et al., All-iron redox flow battery in flow-through and flow-over set-ups: the critical role of cell configuration., Energy Advance., 2024, 3, 1329. [3] X. Lou., et al., Cost-Effective Membrane and Advanced Electrode for Stable Polysulfide-Ferricyanide Flow Battery, Energy Material Advances, Volume 2022, Article ID 9865618, 11 pages. [4] M.S. Khabbaz, S. Biabanialitappeh, and X. Wei., Electrocatalysts and Membranes for Aqueous Polysulfide Redox Flow Batteries., ACS Nano 2025, 19, 20321−20356. [5] M. Gao, S. Huang, F. Zhang et al., Successive ionic layer adsorption and reaction deposited copper sulfide electrocatalyst for high-power polysulfide-based aqueous flow batteries., Materials Today Energy 18 (2020) 100540. [6] M.S. Khabbaz., et al., A polysulfide/ferricyanide redox flow battery with extended cycling, J. Mater. Chem. A, 2025, 13, 29610. [7] Y. Qin, X. Li, W. Liu, X. Lei., High-performance aqueous polysulfide-iodide flow battery realized by an efficient bifunctional catalyst based on copper sulfide, Materials Today Energy 21 (2021) 100746.
Zitieren
APA
Pahlevaninezhad, M., Natale, E., Poli, N., Itskou, I., Quinn, A. H., Pala, D. E., Magagnin, L., & Brushett, F. (2026). Electrode and Electrocatalyst Screening for a Polysulfide-Ferri/Ferrocyanide Flow Battery. ECS Meeting Abstracts, MA2026-01(43), 2194-2194. https://doi.org/10.1149/ma2026-01432194mtgabs
Vancouver
Pahlevaninezhad M, Natale E, Poli N, Itskou I, Quinn AH, Pala DE, et al. Electrode and Electrocatalyst Screening for a Polysulfide-Ferri/Ferrocyanide Flow Battery. ECS Meeting Abstracts. 2026;MA2026-01(43):2194-2194. doi:10.1149/ma2026-01432194mtgabs
BibTeX
@article{Pahlevaninezhad2026,
author = {Pahlevaninezhad, Maedeh and Natale, Eleonora and Poli, Nicola and Itskou, Ioanna and Quinn, Alexander H. and Pala, Damla Eroglu and Magagnin, Luca and Brushett, Fikile},
title = {Electrode and Electrocatalyst Screening for a Polysulfide-Ferri/Ferrocyanide Flow Battery},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {43},
pages = {2194--2194},
doi = {10.1149/ma2026-01432194mtgabs}
}
EUVIMED