Cost-Effective Vanadium Electrolytes for Vanadium Redox Flow Batteries Prepared from Industrial-Grade V₂O₅
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (43) · 2180-2180
DOI: 10.1149/ma2026-01432180mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Cian-Tong Lu und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Vanadium redox flow batteries (VRFBs) have emerged as a key technology for renewable energy storage owing to their high safety, decoupled scalability of power and energy, and flexible system design. Among the various system components, the vanadium electrolyte represents the primary cost contributor, and its cost fraction increases significantly with longer required energy storage durations. Reducing electrolyte cost without sacrificing electrochemical performance is therefore critical for improving the economic feasibility of VRFB systems. In this study, electrolytes prepared from industrial-grade and reagent-grade vanadium pentoxide (V₂O₅) were systematically investigated and compared with a commercial vanadium electrolyte in terms of electrochemical performance and cost. To improve the purity of the industrial-grade V₂O₅, a pretreatment process was applied prior to electrolyte preparation. The results show that both laboratory-prepared electrolytes exhibit electrochemical performance comparable to that of the commercial electrolyte. At a current density of 100 mA cm⁻² , the electrolyte prepared from industrial-grade V₂O₅ achieved a coulombic efficiency (CE) of 96.5% , a voltage efficiency (VE) of 80% , and an energy efficiency (EE) of 77.2% , while the electrolyte prepared from reagent-grade V₂O₅ exhibited a CE of 96.8% , a VE of 80% , and an EE of 77.4% . These values are close to those of the commercial electrolyte, which showed a CE of 97.6% , a VE of 81% , and an EE of 79% under the same operating conditions. In contrast, significant cost advantages were observed for the industrial-grade electrolyte. The electrolyte prepared from industrial-grade V₂O₅ was approximately 50% lower in cost than the commercial electrolyte and also lower than that prepared from reagent-grade V₂O₅ ( 60% of the commercial cost). These results demonstrate that, with appropriate pretreatment, industrial-grade raw materials can substantially reduce electrolyte cost while maintaining electrochemical performance, highlighting their strong potential for practical VRFB applications and large-scale energy storage deployment.
Zitieren
APA
Lu, C., & Yeh, C. (2026). Cost-Effective Vanadium Electrolytes for Vanadium Redox Flow Batteries Prepared from Industrial-Grade V₂O₅. ECS Meeting Abstracts, MA2026-01(43), 2180-2180. https://doi.org/10.1149/ma2026-01432180mtgabs
Vancouver
Lu C, Yeh C. Cost-Effective Vanadium Electrolytes for Vanadium Redox Flow Batteries Prepared from Industrial-Grade V₂O₅. ECS Meeting Abstracts. 2026;MA2026-01(43):2180-2180. doi:10.1149/ma2026-01432180mtgabs
BibTeX
@article{Lu2026,
author = {Lu, Cian-Tong and Yeh, Chia-Hung},
title = {Cost-Effective Vanadium Electrolytes for Vanadium Redox Flow Batteries Prepared from Industrial-Grade V₂O₅},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {43},
pages = {2180--2180},
doi = {10.1149/ma2026-01432180mtgabs}
}
EUVIMED