Solvent-Processable Ion Conducting Polyolefin with Thiol-Ene Crosslinking for Scaled Production of Anion Exchange Membranes
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (38) · 1990-1990
DOI: 10.1149/ma2026-01381990mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Hazel Gerber und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The global shift towards renewable energy sources is challenged by their inherent intermittency and therefore demands energy storage devices which can be manufactured and operate at large scales. Hydrogen produced through anion exchange membrane water electrolysis (AEMWE) is a promising solution. The manufacturing technologies to fabricate the anion exchange membrane (AEM) at scale are still in their infancy due to the limited amount of work on solvent processable AEMs which are alkaline stable. While aromatic and ether containing cationic polymers show good solubility for ease of processing, they suffer from degradation in an alkaline environment. Polynorbornene (PNB), a saturated aliphatic hydrocarbon polymer, is extremely alkaline stable, although the functionalized form is often poorly soluble. Because of this limitation, the prepolymer film is functionalized in the solid state by soaking in trimethylamine (TMA), a method incompatible with roll-to-roll processing. This work details a new method of fabricating PNB AEMs from a solution processable quaternary ammonium functionalized polyolefin, eliminating the need for lengthy TMA exposure after membrane formation. Random copolymers of vinyl norbornene and bromobutyl norbornene were synthesized through vinyl-addition polymerization and the polymer was functionalized in solution prior to film casting. Incorporation of the vinyl group enabled photo-initiated thiol-ene crosslinking independent of the quaternarization reaction which converts the perpolymer into the quaternary ammonium ion conducting form. Having two functional groups (bromoalkyl and vinyl) decouples the crosslinking and the ion conducting function. Thiol-ene crosslinking was compared to the conventional mode of crosslinking through the Menshutkin reaction with a diamine crosslinker and was found to be significantly more efficient for the functionalized polymer. The crosslink density could be tuned through the mole fraction of vinyl norbornene in the copolymer. By changing the degree of crosslinking, the hydroxide conductivity, ion exchange capacity, and mechanical strength of the film could be more easily tuned. The effect of thiol-ene crosslinking on the performance of an AEMWE was investigated. Notably, the solution processable film without any crosslinker exhibited low cell voltage and almost no degradation under constant current operation. The detrimental effects of membrane swelling during water electrolysis could be mitigated by incorporating a mechanical support. These results demonstrate a novel route towards highly conductive, mechanically stable, solvent processable AEMs for water electrolysis.
Zitieren
APA
Gerber, H., & Kohl, P. (2026). Solvent-Processable Ion Conducting Polyolefin with Thiol-Ene Crosslinking for Scaled Production of Anion Exchange Membranes. ECS Meeting Abstracts, MA2026-01(38), 1990-1990. https://doi.org/10.1149/ma2026-01381990mtgabs
Vancouver
Gerber H, Kohl P. Solvent-Processable Ion Conducting Polyolefin with Thiol-Ene Crosslinking for Scaled Production of Anion Exchange Membranes. ECS Meeting Abstracts. 2026;MA2026-01(38):1990-1990. doi:10.1149/ma2026-01381990mtgabs
BibTeX
@article{Gerber2026,
author = {Gerber, Hazel and Kohl, Paul},
title = {Solvent-Processable Ion Conducting Polyolefin with Thiol-Ene Crosslinking for Scaled Production of Anion Exchange Membranes},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {38},
pages = {1990--1990},
doi = {10.1149/ma2026-01381990mtgabs}
}
EUVIMED