EUVIMEDEUVIMED entdecken
Crossref

Multiscale Impact of Electrolyte Saturation and Transport during CO 2 Reduction over Nanoporous Copper Catalyst Layers

Daniel Choukroun, Dimitra Papamichail, Deema Balalta, Filipe Gusmao, Didier Grandjean, Gonzalo Santoro, Sara Bals, Jose-Angel Martin Gago, Ewald Janssens, Tom Breugelmans

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (38) · 1981-1981

DOI: 10.1149/ma2026-01381981mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Daniel Choukroun und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrochemical conversion of carbon dioxide in membrane-type cells involves a range of physical and chemical phenomena on multiple levels, i.e. atomic/nano (catalyst surface/aggregate), meso (saturation and transport in porous media) and macro(bulk/interfacial gas and liquid transport). Copper-based catalyst layers produce macroscopically detectable quantities of ethylene and ethanol, but also a substantial amount of (bi)carbonate, due to chemical absorption with locally generated hydroxide ions. In this work we examine how that electrolyte uptake and transport across the membrane-catalyst layer-gas diffusion electrode interface impacts the electronic and morphological properties of the catalyst as well as the macroscopic outcome of the reaction. To this end, thin nanoporous copper oxide catalyst layers (50-200 nm, Figure 1a) were fabricated using both laser ablation cluster beam deposition and magnetron sputtering with gas aggregation. In situ X-ray absorption spectroscopy revealed that the as-prepared CuO x clusters reduce to metallic copper under bias, their particle size varying according to the initial catalyst layer thickness and the differences in volumetric reaction rate. In turn, these differences translate into higher ethylene and ethanol faradaic efficiencies and suppression of methane and hydrogen under otherwise identical operating conditions at constant current in a zero-gap membrane cell (Figure 2b). By realizing a lower initial catalyst saturation (thicker nanoporous deposit, 1.2 µm, 70% porosity) and improved internal electrolyte transport (membrane flux, Figure 1c) we were able to achieve stable electrolysis for a duration of 24 hours and carry out a detailed mass balance and post-electrolysis characterization of the catalyst layer. This study demonstrates how balanced electrolyte supply and saturation of the catalyst layer affects electrolysis both at the nanoparticle and device levels. Figure 1

Zitieren

APA

Choukroun, D., Papamichail, D., Balalta, D., Gusmao, F., Grandjean, D., Santoro, G., Bals, S., Gago, J. M., Janssens, E., & Breugelmans, T. (2026). Multiscale Impact of Electrolyte Saturation and Transport during CO 2 Reduction over Nanoporous Copper Catalyst Layers. ECS Meeting Abstracts, MA2026-01(38), 1981-1981. https://doi.org/10.1149/ma2026-01381981mtgabs

Vancouver

Choukroun D, Papamichail D, Balalta D, Gusmao F, Grandjean D, Santoro G, et al. Multiscale Impact of Electrolyte Saturation and Transport during CO 2 Reduction over Nanoporous Copper Catalyst Layers. ECS Meeting Abstracts. 2026;MA2026-01(38):1981-1981. doi:10.1149/ma2026-01381981mtgabs

BibTeX
@article{Choukroun2026,
  author = {Choukroun, Daniel and Papamichail, Dimitra and Balalta, Deema and Gusmao, Filipe and Grandjean, Didier and Santoro, Gonzalo and Bals, Sara and Gago, Jose-Angel Martin and Janssens, Ewald and Breugelmans, Tom},
  title = {Multiscale Impact of Electrolyte Saturation and Transport during CO 2 Reduction over Nanoporous Copper Catalyst Layers},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {38},
  pages = {1981--1981},
  doi = {10.1149/ma2026-01381981mtgabs}
}
Kostenlos starten →