Anode Utilization in Lithium-Sulfur Batteries: Influence of Lithium Inventory and Mechanical Pressure
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 342-342
DOI: 10.1149/ma2026-013342mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Mei Luo und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Lithium-sulfur (Li-S) batteries offer high theoretical energy density but suffer from complex chemo-mechanical degradation processes involving sulfur cathode volume change, lithium metal instability, and impedance growth. In this work, we systematically investigate anode utilization effects in Li-S batteries by decoupling the roles of lithium inventory and mechanical pressure, spanning coin-cell and pouch-cell platforms. The influence of lithium anode amount on cycling behavior was first examined in coin cells using sulfurized carbon cathodes and lithium metal anodes with varying thicknesses, ranging from minimal-lithium configurations to excess-lithium conditions. Cells with low lithium amounts exhibit rapid lithium consumption, pronounced impedance growth, and accelerated capacity decay due to the formation of electrically isolated “dead” lithium encapsulated by thick solid-electrolyte interphase (SEI) layers. Increasing lithium inventory significantly improves cycling stability and reversibility by providing a lithium reservoir. Building on these observations, the effect of stack pressure on pouch-cell performance was investigated, showing that higher applied pressure mitigates cell expansion, promotes more uniform lithium utilization, and improves electrochemical performance. X-ray micro-computed tomography (Micro-CT) and complementary post-mortem analyses were employed to quantify electrode-level volume changes and morphological evolution in both sulfur cathodes and lithium metal anodes, revealing the effects of pressure and lithium inventory on electrode deformation, lithium utilization, and reservoir depletion. Overall, this study demonstrates a strong coupling between lithium inventory, mechanical pressure, anode utilization, and electrochemical performance in Li-S batteries, providing critical design insights for optimizing anode thickness and pressure conditions in practical Li-S battery systems. Acknowledgements The information, data, or work presented herein was funded in part by the Advanced Research Projects Agency – Energy (ARPA-E), U.S. Department of Energy. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. This work was mainly conducted at the Cell Analysis, Modeling, and Prototyping Facility at Argonne National Laboratory. We used resources of the Center for Nanoscale Materials, U.S. Department of Energy (DOE) Office of Science User Facilities operated for the DOE Office of Science by Argonne National Laboratory under Contract DE-AC02-06CH11357.
Zitieren
APA
Luo, M., Qin, Y., Dunlop, A., Liu, X., Salvatierra, R. V., Jansen, A. N., & Lu, W. (2026). Anode Utilization in Lithium-Sulfur Batteries: Influence of Lithium Inventory and Mechanical Pressure. ECS Meeting Abstracts, MA2026-01(3), 342-342. https://doi.org/10.1149/ma2026-013342mtgabs
Vancouver
Luo M, Qin Y, Dunlop A, Liu X, Salvatierra RV, Jansen AN, et al. Anode Utilization in Lithium-Sulfur Batteries: Influence of Lithium Inventory and Mechanical Pressure. ECS Meeting Abstracts. 2026;MA2026-01(3):342-342. doi:10.1149/ma2026-013342mtgabs
BibTeX
@article{Luo2026,
author = {Luo, Mei and Qin, Yan and Dunlop, Alison and Liu, Xiaoyang and Salvatierra, Rodrigo Villegas and Jansen, Andrew N. and Lu, Wenquan},
title = {Anode Utilization in Lithium-Sulfur Batteries: Influence of Lithium Inventory and Mechanical Pressure},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {3},
pages = {342--342},
doi = {10.1149/ma2026-013342mtgabs}
}
EUVIMED