Development of Efficient Components for Sodium-Ion Battery
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 312-312
DOI: 10.1149/ma2026-013312mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Suddhasatwa Basu und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Research and development for the practical realization of sodium-ion batteries have been thriving worldwide, offering them as a complementary solution to existing lithium-ion batteries for the integration of renewable energy supplies into an efficient electrical energy storage device. However, the proposed solution lags behind its counterpart in terms of energy density, especially due to the ineffective cathode component, which constitutes one-third of the total battery manufacturing expense. While hard carbon (HC) seems to be the choice of anode, polyanionic compounds, particularly phosphate-based Na 3 V 2 (PO 4 ) 3 , (NVP), and fluorine-rich Na 3 V 2 (PO 4 ) 2 F 3 (NVPF) derivative, have emerged as promising cathode candidates owing to their 3D framework, thermostable structure, and rapid sodium-ion dynamics. Nevertheless, the limited rate capability and cycling stability due to interfacial and interphasial instabilities retards their implementation for next-generation storage systems. Therefore, we employed a surface modification strategy to synthesize boron-doped carbon-coated (BDC)[1] bimodal NVPF spheres. Here, the electrodes with a high active material (> 90 wt.%) were fabricated, unlike the reported literature (~ 70-80 wt.%), providing practical insights into their electrochemical behavior. Optimized composite (10 wt.% BDC-NVPF) exhibited improved initial discharge capacity (101.53 ± 0.99 mAh g -1 vs. 89.8 ± 1.99 mAh g -1 at C/10) and lower irreversible capacity contribution (initial Coulombic efficiency: 82.45 ± 1.17 % vs. 68.75 ± 1.38 % at C/10) with excellent rate performance as illustrated in Figure 1 (a) (b). The substantial performance improvements are attributed to the protective behavior of the BDC matrix for restricted electrode-electrolyte contact, resulting in reduced solvent degradation products and enrichment of the formed stable interface with inorganic elements, justified through XPS and TOF-SIMS measurements. Further, to design greener sodium-ion cells, we employed a water-based, sustainable, and economical electrode processing route instead of conventional, toxic, and expensive N-methyl-2-pyrrolidone-based slurry preparation. We compared the electrochemical activity considering a realistic formulation (Active material > 90 wt.%; Loading- NVP: 14-16 mg cm -2 , HC: 6-7.5 mg cm -2 ) in a full coin cell orientation. Here, the optimized aqueous-processed NVP|HC exhibited a discharge capacity of 83.96 ± 0.37 mAh g -1 with 92.46 % capacity retention after 100 cycles at a C/5-rate. To impart safety attributes to the developed greener cells and mitigate the hazardous impact of the employed ester electrolyte, we integrated biphenyl (BP)[2] into the electrolyte mixture. Here, the moderate dosage (3 w/v.%) of BP demonstrated an anti-overcharge capability through restraining the upper cutoff voltage at ~ 4.4 V, while low (1 w/v.%) seems insufficient, and excessive composition (5 w/v.%) resulted in rapid capacity attenuation once overcharged, as revealed in Figure 1 (c). The comprehensive XPS measurement provided the rationale for the single overcharge-cycle inhibition of BP-cells with a retrieved cathode, revealing an interphase composed of electro-polymerized oligomers, detrimental to further sodium-ion migration, and an anode confirming the efficiency of BP in retarding parent electrolyte decomposition. Here, the detailed structure-property-performance investigation deduced the beneficial aspects of deployed strategies for designing greener, safer, and efficient sodium-ion cells based on polyanionic cathode and hard carbon anode, and reinforced their potential applications for other classes of battery materials. Reference [1] W. Shen, H. Li, C. Wang, Z. Li, Q. Xu, H. Liu, Y. Wang, Improved electrochemical performance of the Na 3 V 2 (PO 4 ) 3 cathode by B-doping of the carbon coating layer for sodium-ion batteries, J Mater Chem A Mater 3 (2015) 15190–15201. [2] L. Xiao, X. Ai, Y. Cao, H. Yang, Electrochemical behavior of biphenyl as polymerizable additive for overcharge protection of lithium ion batteries, Electrochim Acta 49 (2004) 4189–4196. Figure 1
Zitieren
APA
Basu, S., & Gupta, P. (2026). Development of Efficient Components for Sodium-Ion Battery. ECS Meeting Abstracts, MA2026-01(3), 312-312. https://doi.org/10.1149/ma2026-013312mtgabs
Vancouver
Basu S, Gupta P. Development of Efficient Components for Sodium-Ion Battery. ECS Meeting Abstracts. 2026;MA2026-01(3):312-312. doi:10.1149/ma2026-013312mtgabs
BibTeX
@article{Basu2026,
author = {Basu, Suddhasatwa and Gupta, Priyanka},
title = {Development of Efficient Components for Sodium-Ion Battery},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {3},
pages = {312--312},
doi = {10.1149/ma2026-013312mtgabs}
}
EUVIMED