EUVIMEDEUVIMED entdecken
Crossref

An in-Situ Formed Quasi Solid-State Polymer Electrolyte for High-Performance Lithium Metal Batteries

Ridwan Ahmed, Ju-Myung Kim, Ji-Guang Zhang, Wu Xu

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 255-255

DOI: 10.1149/ma2026-013255mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Ridwan Ahmed und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In-situ formed polymer electrolytes offer a promising strategy to address key limitations of ex-situ polymer systems, including low room temperature ionic conductivity, poor interfacial contact, and wettability. In this work, we report a high-voltage in-situ formed quasi solid-state polymer electrolyte engineered to enable uniform lithium (Li) metal deposition and promote stable interphases on both the Li metal anode and the high-voltage cathode. When this is utilized in practical Li||LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) full cells with a thin 50 µm thick Li metal anode and moderate to high cathode loadings (2.4–4.2 mAh cm⁻²), the electrolyte enables improved cycling performance relative to state-of-the-art in-situ formed polymer electrolytes. For instance, Li||NMC622 full cells with this novel electrolyte deliver an initial specific capacity of 188.7 mAh g⁻¹ with a capacity retention of ~ 94.8% after 100 cycles at a 0.1C/0.2C charge/discharge rate. However, cells with the state-of-the-art in-situ polymerized 1,3-dioxolane electrolyte deliver a comparable initial specific capacity of 189.3 mAh g⁻¹ but retain only ~ 4.3% after 100 cycles. These findings highlight a practical strategy for high-energy, stable solid-state lithium-metal batteries.

Zitieren

APA

Ahmed, R., Kim, J., Zhang, J., & Xu, W. (2026). An in-Situ Formed Quasi Solid-State Polymer Electrolyte for High-Performance Lithium Metal Batteries. ECS Meeting Abstracts, MA2026-01(3), 255-255. https://doi.org/10.1149/ma2026-013255mtgabs

Vancouver

Ahmed R, Kim J, Zhang J, Xu W. An in-Situ Formed Quasi Solid-State Polymer Electrolyte for High-Performance Lithium Metal Batteries. ECS Meeting Abstracts. 2026;MA2026-01(3):255-255. doi:10.1149/ma2026-013255mtgabs

BibTeX
@article{Ahmed2026,
  author = {Ahmed, Ridwan and Kim, Ju-Myung and Zhang, Ji-Guang and Xu, Wu},
  title = {An in-Situ Formed Quasi Solid-State Polymer Electrolyte for High-Performance Lithium Metal Batteries},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {3},
  pages = {255--255},
  doi = {10.1149/ma2026-013255mtgabs}
}
Kostenlos starten →