Highly Stable Quasi-Solid-State Anode-Free Lithium Metal Batteries Enabled by Dynamic Integrated Interface Engineering
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 231-231
DOI: 10.1149/ma2026-013231mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Yunyi Chen und 7 weiteren Autor:innen.
Abstract (Originalsprache)
Anode-free lithium metal batteries offer unprecedented energy density and simplified manufacturing processes, emerging as a transformative platform for sustainable energy storage systems. However, their practical implementation is hindered by low lithium plating/stripping reversibility. Herein, we propose dynamic integrated interface engineering strategy involving the incorporation of a minimal Ag-based multifunctional initiator (AMI) into the electrolyte, and leveraging its controlled-release function to simultaneously achieve Cu current collector modification, SEI reconstruction, and in-situ electrolyte polymerization after battery assembly, thereby enabling efficient long-term cycling of anode-free lithium metal batteries in a unified process. AMI is composed of silver cations and anions with strong Lewis acid properties. Firstly, by adjusting the plating potential, the Ag + provided by AMI can be reduced to silver particles and achieve precise morphology control. This significantly enhanced the lithium affinity of the Cu foil. Additionally, the in-situ polymerization induced by anions of AMI facilitates electrolyte-electrode connections, ensuring a robust charge transfer for Li + . Importantly, through the synergistic interactions of interfacial metal modification and AMI anions-induced ring-opening polymerization of solvents (1,3-Dioxolane, DOL), the adsorption capacity of the current collector for anions and the solvation sheath in electrolytes can be both altered, enabling in-situ formation of a bilayer-inverted SEI architecture with a unique organic-rich inner layer and inorganic-rich outer layer (OI-IO) structure on the electrode surface. This OI-IO structure, sustained by the substrate-anchored anionic groups, effectively maintains a high content of inorganic components in the outer SEI layer during repeated cycling, thereby constructing a sturdy and long-lasting protective barrier. Consequently, the anode-free Cu||LiFePO 4 (LFP) full cell demonstrates 90% capacity retention over 200 cycles, while high-loading cathodes (>12 mg cm -2 ) under lithium-limited conditions (N/P=0.8) maintain stable operation for 300 cycles. In addition, at an N/P ratio of 1 and a charge/discharge rate of 0.5 C, the capacity retention rate remains above 90% after 1100 cycles. The assembled Cu||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) pouch cell achieves a capacity of up to 2.25 Ah and an energy density of nearly 467 Wh kg -1 .
Zitieren
APA
Chen, Y., Qian, X., Lyu, Y., Qiu, Y., Zhou, S., Lan, X., LU, S., & Shao, M. (2026). Highly Stable Quasi-Solid-State Anode-Free Lithium Metal Batteries Enabled by Dynamic Integrated Interface Engineering. ECS Meeting Abstracts, MA2026-01(3), 231-231. https://doi.org/10.1149/ma2026-013231mtgabs
Vancouver
Chen Y, Qian X, Lyu Y, Qiu Y, Zhou S, Lan X, et al. Highly Stable Quasi-Solid-State Anode-Free Lithium Metal Batteries Enabled by Dynamic Integrated Interface Engineering. ECS Meeting Abstracts. 2026;MA2026-01(3):231-231. doi:10.1149/ma2026-013231mtgabs
BibTeX
@article{Chen2026,
author = {Chen, Yunyi and Qian, Xitang and Lyu, Yuxiang and Qiu, Yican and Zhou, Siyu and Lan, Xinyi and LU, Siqi and Shao, Minhua},
title = {Highly Stable Quasi-Solid-State Anode-Free Lithium Metal Batteries Enabled by Dynamic Integrated Interface Engineering},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {3},
pages = {231--231},
doi = {10.1149/ma2026-013231mtgabs}
}
EUVIMED