EUVIMEDEUVIMED entdecken
Crossref

Rational Selection of Ionic Liquid Electrolytes for Lithium-Sulfur Batteries: Linking Ionic Liquid Properties, Polysulfide Solubility, and Electrochemical Performance

Kubra Guler, Aysegul Kilic, Alper Uzun, Ramazan Yildirim, Damla Eroglu

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 220-220

DOI: 10.1149/ma2026-013220mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Kubra Guler und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium-sulfur (Li-S) batteries have received significant attention in the last decade due to their high theoretical specific energy. However, the energy density and cycle life of Li-S batteries require improvement. As a result of the complicated mechanisms in a Li-S battery, electrolyte design has a substantial effect on the battery performance. Consequently, designing effective electrolytes is essential for Li-S batteries to be commercialized. The electrolytes of Li-S batteries must be specifically designed to prevent the polysulfide shuttle mechanism, which arises from the transport of reaction intermediates, lithium polysulfides, within the cell. Altering the solubility of these species in the electrolyte is a promising approach. Ionic liquids exhibit high stability and versatile properties, making them a rising alternative for next-generation battery electrolytes. However, for the rational selection of promising IL electrolytes for Li-S batteries, the key connection between ionic liquid properties, lithium polysulfide solubility, and battery performance should be better understood, which is the focus of this study. In this study, first, the solubility of lithium polysulfides (Li 2 S 8 ) and the viscosity, melting point, and electronic conductivity of 36260 ionic liquids were computed using COSMO-RS calculations. Secondly, a DFT model was developed for the anions and cations of these ionic liquids for determining the structural descriptors. Next, the relationship between lithium polysulfide solubility and structural descriptors was analyzed using machine learning tools, and promising ionic liquids were proposed. As a result of the selected performance criteria based on polysulfide solubility (solubilities in the range of -0.7 to 0.1 mol/mol on a logarithmic scale) and ionic liquid properties (viscosity below 100 mPa.s, melting point below 0 °C, electronic conductivity below 2 mS/cm), 650 out of 36260 ionic liquids were selected as promising electrolytes [1]. In the experimental part of the study, the electrochemical performance of Li-S cells prepared with 10 selected ionic liquid electrolytes was characterized by galvanostatic cycling, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) methods. The 10 ionic liquids that were experimentally characterized were selected as PP14-TFSI (1-butyl-1-methylpiperidinium/ bis(trifluoromethane)sulfonimide), DEME-TFSI (N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium/ bis(trifluoromethane)sulfonimide), BMIM-PF₆ (1-butyl-3-methyl-imidazolium/ hexafluorophosphate), BMIM-CF₃SO₃ (1-butyl-3-methyl-imidazolium/ trifluoromethane-sulfonate), TBMA-TFSI (tributylmethylammonium/ bis(trifluoromethane)sulfonimide), BMIM-MeSO₄ (1-butyl-3-methyl-imidazolium/ methylsulfate), BMPyr-TFSI (1-Butyl-1-methylpyrrolidinium/ bis(trifluoromethane)sulfonimide), BMIM-TFSI(1-butyl-3-methyl-imidazolium/ bis(trifluoromethane)sulfonimide), BMPyr-DCA (1-Butyl-1-methylpyrrolidinium- dicyanamide), and Chol-TFSI (Choline/ bis(trifluoromethane)sulfonimide). Their electrochemical performance was evaluated using galvanostatic cycling, EIS, and CV. The best performance was observed for PP14-TFSI, DEME-TFSI, and BMPyr-TFSI, as shown in Table 1, all of which were predicted as class A (high-performance class based on viscosity and polysulfide solubility) by the machine learning model. BMIM-TFSI, also predicted as class A, exhibited comparable performance, particularly in the early cycles and toward the end of 100 cycles. In contrast, Chol-TFSI, which was also predicted to perform well, suffered from rapid capacity fading, likely due to factors not captured by the model (e.g., electrolyte degradation), as suggested by the CV experiments. Finally, for Li-S cells containing PP14-TFSI, the effects of ionic liquid/organic electrolyte ratio, sulfur loading, and electrolyte-to-sulfur (E/S) ratio on cycling performance were also investigated. Table 1. COSMO-RS calculations and experimental performance results for the Li-S cells containing 10 different ionic liquid electrolytes Acknowledgment This study was funded by The Scientific and Technological Research Council of Turkey (TUBITAK), Grant No: 221M542. References [1] A. Kilic, O. Abdelaty, M. Zeeshan, A. Uzun, R. Yildirim, D. Eroglu,Selection of Ionic Liquid Electrolytes for High-Performing Lithium-Sulfur Batteries: An Experiment-Guided High-Throughput Machine Learning Analysis, Chemical Engineering Journal, 490(2024) 151562. Figure 1

Zitieren

APA

Guler, K., Kilic, A., Uzun, A., Yildirim, R., & Eroglu, D. (2026). Rational Selection of Ionic Liquid Electrolytes for Lithium-Sulfur Batteries: Linking Ionic Liquid Properties, Polysulfide Solubility, and Electrochemical Performance. ECS Meeting Abstracts, MA2026-01(3), 220-220. https://doi.org/10.1149/ma2026-013220mtgabs

Vancouver

Guler K, Kilic A, Uzun A, Yildirim R, Eroglu D. Rational Selection of Ionic Liquid Electrolytes for Lithium-Sulfur Batteries: Linking Ionic Liquid Properties, Polysulfide Solubility, and Electrochemical Performance. ECS Meeting Abstracts. 2026;MA2026-01(3):220-220. doi:10.1149/ma2026-013220mtgabs

BibTeX
@article{Guler2026,
  author = {Guler, Kubra and Kilic, Aysegul and Uzun, Alper and Yildirim, Ramazan and Eroglu, Damla},
  title = {Rational Selection of Ionic Liquid Electrolytes for Lithium-Sulfur Batteries: Linking Ionic Liquid Properties, Polysulfide Solubility, and Electrochemical Performance},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {3},
  pages = {220--220},
  doi = {10.1149/ma2026-013220mtgabs}
}
Kostenlos starten →