EUVIMEDEUVIMED entdecken
Crossref

Digital Twin–Based 3D Microstructure–to–P2D Performance Prediction for Sulfide All-Solid-State Batteries

Seungwon Jung, Hyunwoo Chung, Hyemin Kim, Yong Min Lee

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (2) · 184-184

DOI: 10.1149/ma2026-012184mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Seungwon Jung und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent safety incidents in electric vehicles (EVs) and energy storage systems (ESSs) have accelerated the demand for safer lithium-based batteries. All-solid-state batteries (ASSBs), which replace flammable liquid electrolytes with inorganic solid electrolytes, are considered a strong candidate due to their improved safety and the potential for high energy density enabled by advanced cell architectures. However, practical ASSB performance is often limited by the composite electrode microstructure: the active material (AM) and solid electrolyte (SE) must form continuous ion/electron transport networks while maintaining sufficient interfacial contact for charge transfer. Increasing the SE fraction generally improves ionic percolation but reduces energy density, creating a persistent design trade-off. Therefore, a microstructure-aware modeling framework is essential to quantitatively link electrode design variables (e.g., AM fraction) to cell-level performance. In this study, we establish a multiscale digital-twin workflow that translates three-dimensional (3D) composite electrode structures into continuum-scale parameters for ASSB pseudo-two-dimensional (P2D) simulations. First, representative 3D electrode microstructures are generated and analyzed to extract key performance parameters governing electrochemical behavior, including effective transport descriptors (e.g., tortuosity-based effective ionic pathways and effective electronic/ionic conductivities) and interfacial descriptors (e.g., effective reaction area, contact/coverage factors between AM and SE, and metrics reflecting microstructural connectivity). These 3D-derived parameters are then functionalized as composition-dependent surrogate relations, enabling rapid assignment of physically grounded electrode properties as a function of AM/SE ratio without repeatedly performing computationally expensive 3D analyses. Next, the functionalized parameter set is integrated into an ASSB P2D model to predict full-cell electrochemical performance. To ensure consistency with experimental observations and to prevent overfitting across multiple compositions, we perform parameter estimation using experimental data at a single reference composition: a cathode with 85 wt% active material. This calibration step provides a validated baseline for kinetic and interfacial parameters, while the microstructure-derived surrogate functions capture systematic changes in effective transport and interfacial activity induced by composition variations. Based on this calibrated-and-transferred framework, we predict ASSB performance across other electrode compositions and evaluate how composition-driven microstructural changes influence polarization, rate capability, and utilization. Overall, this work demonstrates a practical microstructure-to-P2D bridge for ASSBs: 3D electrode structures are converted into effective parameters, the parameters are expressed as composition-dependent functions, and a single experimentally anchored calibration point (85 wt% AM) enables reliable extrapolation to other compositions. The proposed workflow supports rational composite electrode design by quantifying the competing roles of transport limitation and interfacial availability, thereby providing a predictive tool for optimizing high-performance all-solid-state batteries.

Zitieren

APA

Jung, S., Chung, H., Kim, H., & Lee, Y. M. (2026). Digital Twin–Based 3D Microstructure–to–P2D Performance Prediction for Sulfide All-Solid-State Batteries. ECS Meeting Abstracts, MA2026-01(2), 184-184. https://doi.org/10.1149/ma2026-012184mtgabs

Vancouver

Jung S, Chung H, Kim H, Lee YM. Digital Twin–Based 3D Microstructure–to–P2D Performance Prediction for Sulfide All-Solid-State Batteries. ECS Meeting Abstracts. 2026;MA2026-01(2):184-184. doi:10.1149/ma2026-012184mtgabs

BibTeX
@article{Jung2026,
  author = {Jung, Seungwon and Chung, Hyunwoo and Kim, Hyemin and Lee, Yong Min},
  title = {Digital Twin–Based 3D Microstructure–to–P2D Performance Prediction for Sulfide All-Solid-State Batteries},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {2},
  pages = {184--184},
  doi = {10.1149/ma2026-012184mtgabs}
}
Kostenlos starten →