Cation-Dependent Structural and Electrochemical Behavior of LiNi 0.5 Mn 1.5 O 4 : Why Cr Doping Stands Out
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (2) · 170-170
DOI: 10.1149/ma2026-012170mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Eunkyeong Kim und 5 weiteren Autor:innen.
Abstract (Originalsprache)
High-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) is regarded as a promising cobalt-free cathode material for next-generation lithium-ion batteries due to its high operating voltage (~4.7 V) and exceptional energy density. However, its practical application remains limited by intrinsic structural instabilities, including Ni/Mn cation disorder, Jahn-Teller distortion associated with Mn 3+ , and the formation of rock-salt-type impurities such as Li X Ni 1-X O under high-temperature calcination. These issues accelerate capacity fading and hinder long-term cyclability, particularly under high-rate conditions. In this study, we systematically investigate the effect of high-level transition-metal substitution (M = Cr, Cu, Zn) at the Ni site in LNMO and elucidate the unique role of Cr doping in enhancing both structural integrity and electrochemical kinetics. Doped LNMO samples with the nominal composition of LiNi 0.375 Cr 0.125 Mn 1.5 O 4 were synthesized via a one-pot spray pyrolysis process followed by optimized calcination. X-ray diffraction combined with Rietveld refinement confirmed that Cr incorporation effectively suppresses the formation of the detrimental Li X Ni 1-X O impurity by strengthening Cr-O bonding and mitigating oxygen loss during thermal treatment. FT-IR and XPS analyses further revealed that Cr doping maintains a moderate degree of Ni/Mn disorder and an optimized Mn 3+ /Mn 4+ ratio, both of which are critical for preserving lattice stability while enabling fast Li + transport. In contrast, Cu- and Zn-doped samples exhibited excessive lattice distortion and unfavorable disorder. Morphological analysis based on SEM revealed that Cr-doped LNMO consists of uniformly sized octahedral particles with well-developed (111) and (110) facets, which are known to enhance surface stability and facilitate Li + diffusion. Electrochemically, the Cr-doped LNMO delivered the highest discharge capacity, superior rate capability, and the most stable long-term cycling performance among all dopants. Cyclic voltammetry demonstrated that although Ni redox peaks were weakened in all doped samples due to modified cation ordering, the Cr-doped electrode exhibited the smallest peak separation indicating minimized polarization and fast reaction kinetics. Notably, Galvanostatic intermittent titration technique (GITT) analysis revealed that the Cr-doped LNMO achieved both the highest Li + diffusion coefficients and the lowest discharge overpotential across the entire lithiation range, evidencing simultaneously enhanced bulk diffusion and suppressed interfacial resistance. These results unambiguously demonstrate that high-level Cr 3+ substitution uniquely optimizes the balance between structural and electrochemical kinetics in LNMO. Compared to Cu and Zn, Cr emerges as the most effective dopant for enabling durable, high-power, and long-life spinel cathodes for next-generation lithium-ion batteries.
Zitieren
APA
Kim, E., Park, S., Nhi, P. Y., Shin, H., Lee, K., & Kim, S. (2026). Cation-Dependent Structural and Electrochemical Behavior of LiNi 0.5 Mn 1.5 O 4 : Why Cr Doping Stands Out. ECS Meeting Abstracts, MA2026-01(2), 170-170. https://doi.org/10.1149/ma2026-012170mtgabs
Vancouver
Kim E, Park S, Nhi PY, Shin H, Lee K, Kim S. Cation-Dependent Structural and Electrochemical Behavior of LiNi 0.5 Mn 1.5 O 4 : Why Cr Doping Stands Out. ECS Meeting Abstracts. 2026;MA2026-01(2):170-170. doi:10.1149/ma2026-012170mtgabs
BibTeX
@article{Kim2026,
author = {Kim, Eunkyeong and Park, Somin and Nhi, Phan Yen and Shin, Hyeyoung and Lee, Kyubock and Kim, Sung-soo},
title = {Cation-Dependent Structural and Electrochemical Behavior of LiNi 0.5 Mn 1.5 O 4 : Why Cr Doping Stands Out},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {2},
pages = {170--170},
doi = {10.1149/ma2026-012170mtgabs}
}
EUVIMED