EUVIMEDEUVIMED entdecken
Crossref

Electrochemical Activation of Lithium Metal Powder Electrodes via Calendering-Induced Interfacial Reconfiguration

SUN HYU KIM, Dongyoon Kang, Jaejin Lim, Yong Min Lee

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (2) · 156-156

DOI: 10.1149/ma2026-012156mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von SUN HYU KIM und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium metal is widely regarded as a promising anode material for next-generation high-energy-density batteries. However, conventional Li foil has been limited by insufficient thickness and areal control, which has delayed its large-scale commercialization. Li metal powder (LMP) has emerged as an attractive alternative for fabricating thin and wide Li metal electrodes via a slurry-based coating process, offering excellent dimensional tunability and compatibility with roll-to-roll processing. Nevertheless, the electrically insulating Li 2 CO 3 passivation layer introduced for safe handling of LMP limits electronic connectivity, resulting in poor Li utilization and unstable cycling behavior. Although calendering is routinely employed during electrode fabrication, its fundamental role in activating LMP electrodes remains insufficiently understood. Herein, we systematically investigate the effect of calendering on the structural evolution, interfacial reconfiguration, and electrochemical activation of LMP electrodes. By varying the calendering ratio from 0% to 40% and beyond, we demonstrate that calendering mechanically fractures the brittle Li 2 CO 3 passivation layer, exposing fresh metallic Li and enhancing interparticle and particle–current collector contacts. Finite-volume-method-based mechanical simulations reveal a critical stress threshold at which Li 2 CO 3 fracture becomes widespread, leading to the formation of continuous electronic transport pathways. Electron beam absorbed current (EBAC) mapping directly visualizes the transition from electrically isolated particles to a conductive one-body structure. Correspondingly, Li||NCM622 full cells employing optimally calendered LMP electrodes exhibit long-term cycling stability comparable to that of conventional Li foil, even under lean electrolyte conditions. These results clarify that calendering is essential for transitioning inactive LMP particles into active state, providing calendering guidelines for the scalable fabrication of high-energy-density lithium metal batteries.

Zitieren

APA

KIM, S. H., Kang, D., Lim, J., & Lee, Y. M. (2026). Electrochemical Activation of Lithium Metal Powder Electrodes via Calendering-Induced Interfacial Reconfiguration. ECS Meeting Abstracts, MA2026-01(2), 156-156. https://doi.org/10.1149/ma2026-012156mtgabs

Vancouver

KIM SH, Kang D, Lim J, Lee YM. Electrochemical Activation of Lithium Metal Powder Electrodes via Calendering-Induced Interfacial Reconfiguration. ECS Meeting Abstracts. 2026;MA2026-01(2):156-156. doi:10.1149/ma2026-012156mtgabs

BibTeX
@article{KIM2026,
  author = {KIM, SUN HYU and Kang, Dongyoon and Lim, Jaejin and Lee, Yong Min},
  title = {Electrochemical Activation of Lithium Metal Powder Electrodes via Calendering-Induced Interfacial Reconfiguration},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {2},
  pages = {156--156},
  doi = {10.1149/ma2026-012156mtgabs}
}
Kostenlos starten →