Uncovering Chemo-Mechanical Processes in High Energy Density Li-Ion Batteries Utilizing Multiscale Post-Mortem and in Operando Imaging Methods Including Advanced Analysis
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 99-99
DOI: 10.1149/ma2026-01199mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Michael Häusler und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The ongoing electrification of society demands enhancements in the energy density, cycling rate and battery life time for future Li-ion batteries. Nevertheless, there is a so-called trilemma, meaning that enhancing one will negatively affect the other two. A promising approach is to work on the energy density, in particular by pairing Nickel-Manganese-Cobalt (NMC) electrodes with a high energy density anode by utilizing silicon (Si). The integration of Si with high percentage into lithium-ion batteries (LiBs) provides high potential to revolutionize state of the art LiBs, since Si presents a remarkable theoretical specific capacity (3579 mAh g -1 for Li 15 Si 4 ), exceeding traditional graphite anodes by over a tenfold. It also stands out for its cost-effectiveness, natural abundance as well as its non-toxic behaviour. Various research has been made in the last years on Si-based anode materials. However, the electrochemical performance in particular of high content Si-based Li-ion batteries still lack due to significant aging issues during cycling. Aging mechanism have not been understood fully, since the study over different length scales as well as chemical, structural and mechanical investigations in a correlated manner has not been taken into account in detail in industrial relevant cell configurations. This makes their widespread application in automotive and storage especially in context to the industrial scale-up challenging. Therefore, a fundamental understanding of the underlying aging mechanism in industrial relevant setups like NMC|Si cells, incorporating multiscale investigations from electrode level, down to single particles, distributed within the electrode, as well as considering the (de)lithiation kinetics of the Si from a chemical and mechanical point of view, is highly essential. The correlative cell, electrode and particle characterization incorporating modern advanced analysis approaches display a crucial ingredient for future battery development helping to derive conclusions for next level designs [1-6]. Here, we would like to show novel insights regarding the underlying aging mechanism of high content Si-anodes upon electrochemical cycling from electrode to single particle level in particular by applying advanced multi-scale correlated imaging characterization methods and incorporating advanced computational approaches like artificial intelligence image [5,6] and digital image correlation analysis [7]. Not only chemical but rather chemo-mechanical considerations are presented, incorporating material science and chemistry alike. Correlated post mortem and in operando imaging studies are performed over different length scales to reveal the structural, mechanical and chemical changes upon cycling. The results provide deep and novel insights regarding the interplay between the (1) reformation process of the solid electrolyte interface (SEI) and accompanied structural and chemical changes at the active materials interface, (2) local strain formation on electrode and individual particle level upon (de)lithiation, (3) complex local lithiation behaviour of single Si particles which are distributed within the NMC|Si electrode in context to a statistical point of view, (4) dislocation formation within the particles due to local strain formation, eventually leading to material phase transformations within the Si particles and the (5) electrochemical performance. References: [1] T. Vorauer, R. Brunner, et al. Multi-scale quantification and modeling of aged nanostructured silicon-based composite anodes. Commun Chem 3, 141 (2020). [2] T. Vorauer, R. Brunner, et al. Impact of solid-electrolyte interphase reformation on capacity loss in silicon-based lithium-ion batteries. Commun Mater 4, 44 (2023). [3] E. Lübke, et al., The origins of critical deformations in cylindrical silicon-based Li-ion batteries. Energy & Environmental Science 14 (2024). [4] M. Häusler, R. Brunner, et al. Amorphous shear band formation in crystalline Si-anodes governs lithiation and capacity fading in Li-ion batteries. Commun Mater 5, 163 (2024). [5] R. Wilhelmer, M. Häusler, R. Brunner et al. GenAI enhanced 4D nano-tomography for advanced battery microstructure analysis, J. Mater. Chem A. 13 (2025). [6] M. Häusler, R. Brunner, et al. Bridging particle-scale lithiation mechanisms and macroscopic performance in high-energy density Si anodes via time-resolved full 3D visualisation (submitted). [7] O. Stamati et al. Spam: Software for Practical Analysis of Materials, The Journal of Open Source Software (2020).
Zitieren
APA
Häusler, M., & Brunner, R. (2026). Uncovering Chemo-Mechanical Processes in High Energy Density Li-Ion Batteries Utilizing Multiscale Post-Mortem and in Operando Imaging Methods Including Advanced Analysis. ECS Meeting Abstracts, MA2026-01(1), 99-99. https://doi.org/10.1149/ma2026-01199mtgabs
Vancouver
Häusler M, Brunner R. Uncovering Chemo-Mechanical Processes in High Energy Density Li-Ion Batteries Utilizing Multiscale Post-Mortem and in Operando Imaging Methods Including Advanced Analysis. ECS Meeting Abstracts. 2026;MA2026-01(1):99-99. doi:10.1149/ma2026-01199mtgabs
BibTeX
@article{Husler2026,
author = {Häusler, Michael and Brunner, Roland},
title = {Uncovering Chemo-Mechanical Processes in High Energy Density Li-Ion Batteries Utilizing Multiscale Post-Mortem and in Operando Imaging Methods Including Advanced Analysis},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {1},
pages = {99--99},
doi = {10.1149/ma2026-01199mtgabs}
}
EUVIMED