Conductive Polymer Binder for GaN Anode in High-Temperature Li-Ion Batteries
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 59-59
DOI: 10.1149/ma2026-01159mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Thuy Thi Bich Tran und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Li-ion batteries (LIBs) are widely used in electronic devices and electric vehicles due to their lightweight design and high energy density. However, challenges remain in battery design in meeting the demands of emerging applications, particularly under extreme temperature conditions. LIBs exhibit the optimal electrochemical performance within a narrow temperature range of 20 – 35 °C. Operating LIBs at elevated temperatures accelerates side reactions and leads to rapid degradation of cycle life. Therefore, special designs are needed for LIBs for high-temperature environments such as oil, gas, aerospace, and hot climates... With a high theoretical capacity of 960 mAh/g (compared to 372 mAh/g of graphite), and strong chemical and thermal stability, gallium nitride (GaN) is a promising candidate for high-temperature LIB anodes. However, the wide band gap of 3.6 eV of GaN limits electron and ion transport, resulting in low charge/discharge capacity. In this work, we present an electrode design that incorporates a conductive binder to enhance the electrical conductivity of GaN anodes. The resulting electrodes exhibit electrical conductivities up to 40 times higher than those fabricated with a conventional PVDF binder, effectively mitigating the intrinsic charge-transfer limitations of GaN. In addition, the use of an aqueous-processable conductive binder provides an environmentally friendly approach to electrode fabrication. Galvanostatic cycling tests demonstrate that the GaN anode with a conductive polymer binder delivers a reversible capacity of ~600 mAh g⁻¹ at 1 A g⁻¹ and 55 °C after 500 cycles, which is significantly higher than the ~350 mAh g⁻¹ achieved by the GaN/PVDF anode under the same operating conditions. This performance enhancement arises from the conductive polymer binder, which facilitates charge transport during cycling by reducing charge-transfer resistance and enhancing Li-ion diffusion.
Zitieren
APA
Tran, T. T. B., & Jayan, R. (2026). Conductive Polymer Binder for GaN Anode in High-Temperature Li-Ion Batteries. ECS Meeting Abstracts, MA2026-01(1), 59-59. https://doi.org/10.1149/ma2026-01159mtgabs
Vancouver
Tran TTB, Jayan R. Conductive Polymer Binder for GaN Anode in High-Temperature Li-Ion Batteries. ECS Meeting Abstracts. 2026;MA2026-01(1):59-59. doi:10.1149/ma2026-01159mtgabs
BibTeX
@article{Tran2026,
author = {Tran, Thuy Thi Bich and Jayan, Reeja},
title = {Conductive Polymer Binder for GaN Anode in High-Temperature Li-Ion Batteries},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {1},
pages = {59--59},
doi = {10.1149/ma2026-01159mtgabs}
}
EUVIMED