EUVIMEDEUVIMED entdecken
Crossref

Ultrafast Flame Exsolution of High-Density Metal Nanoparticles on Perovskite Oxides

Dongjae Kong, Yuzhe Li, Kyoungjae Ju, Jihwan An, Xiaolin Zheng

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 49-49

DOI: 10.1149/ma2026-01149mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Dongjae Kong und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Exsolution of metal nanoparticles (NPs) from perovskite oxides has emerged as a powerful strategy for creating highly stable and strongly anchored catalysts for a wide range of energy conversion applications. [1] However, the conventional thermally driven exsolution route typically requires several hours of reduction at elevated temperatures (500–900 °C), resulting in high energy consumption. [2] Although alternative approaches such as electrochemical [3], plasma-assisted [4], microwave [5], and thermal shock [6] exsolution have reduced processing times, they often require specialized equipment, tens of minutes, or still produce limited NP densities. Here, we report a simple, ultrafast, and effective flame-based exsolution process. Using (La 0.6 Sr 0.4 ) 0.95 (Co 0.2 Fe 0.8 Ni 0.05 )O 3-x (LSCF-5Ni) thin films as a model system, we achieve Ni NP number densities exceeding 500 μm -2 within 60 s, representing state-of-the-art performance in both speed and density. This flame exsolution process leverages the unique thermal and chemical environment of a fuel-rich combustion flame. A premixed methane–air flat flame provides spatially uniform temperatures of approximately 900–950 °C combined with a strongly reducing atmosphere rich in CO and H 2 . By tuning the fuel-to-air equivalence ratio (Φ), the reducing strength of the post-flame environment can be precisely controlled. Scanning electron microscopy reveals flame exposure at Φ = 1.45 for 60 s produces a homogeneous distribution of quasi-spherical Ni NPs with average diameters of ~15–20 nm. The NP number density initially increases rapidly with flame exposure time and subsequently decreases at longer durations due to particle coarsening and Ostwald ripening. Estimation of the total number of exsolved Ni atoms indicates that flame treatment rapidly drives the system to a saturation state, beyond which further reduction does not significantly increase the total exsolved metal content. Structural and chemical analyses confirm that flame exsolution preserves the integrity of the host perovskite lattice. Grazing-incidence X-ray diffraction shows that the cubic perovskite structure of LSCF-5Ni remains intact after flame exposure. Scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy demonstrates that the exsolved NPs are predominantly composed of metallic Ni, with minor Co incorporation. X-ray photoelectron spectroscopy further reveals the emergence of metallic Ni species following flame treatment, accompanied by partial reduction of Fe and Co cations in the lattice, consistent with oxygen vacancy formation during rapid reduction. The generality of flame exsolution is demonstrated on La 0.43 Ca 0.37 Ti 0.94 Ni 0.06 O 3-x (LCTN) pellets, where similarly high NP densities (~550 μm -2 ) are achieved within 60 s. When benchmarked against previously reported exsolution methods, flame exsolution outperforms all alternatives in terms of the combined metrics of speed and NP density. The exceptional efficiency of flame exsolution arises from a synergy of factors: (i) high flame temperatures that promote rapid oxygen vacancy formation and cation mobility; (ii) ultrafast heating/cooling rates that drastically shorten processing times while preserving bulk crystallinity; (iii) sustained replenishment of reducing species (CO and H 2 ) via strong convective transport; and (iv) the presence of highly reactive radical species inherent to combustion environments, which may further accelerate surface reduction pathways. Finally, we demonstrate the practicality of this approach by reproducing dense NP exsolution on both LSCF-5Ni thin films and LCTN pellets using a commercially available propane torch in as little as 20 s. This result underscores the simplicity and scalability of flame exsolution and suggests its potential for broad adoption in both laboratory and industrial settings. In summary, flame exsolution establishes an ultrafast, accessible, and highly effective platform for producing dense, socketed metal NPs on perovskite oxides. This approach opens new opportunities for rapid catalyst fabrication and the design of advanced functional materials for catalysis and energy conversion applications. References [1] D. Neagu et al., Nat. Commun. 8 (1) (2017). [2] Z. Sun et al., J. Mater. Chem. A 11 (34) (2023). [3] J. H. Myung et al., Nat. 537 (2016). [4] V. Kyriakou et al., Small Methods 5 (12) (2021). [5] A. López-García et al., ACS Nano 17 (23) (2023). [6] Z. Sun et al., Adv. Sci. 9 (12) (2022).

Zitieren

APA

Kong, D., Li, Y., Ju, K., An, J., & Zheng, X. (2026). Ultrafast Flame Exsolution of High-Density Metal Nanoparticles on Perovskite Oxides. ECS Meeting Abstracts, MA2026-01(1), 49-49. https://doi.org/10.1149/ma2026-01149mtgabs

Vancouver

Kong D, Li Y, Ju K, An J, Zheng X. Ultrafast Flame Exsolution of High-Density Metal Nanoparticles on Perovskite Oxides. ECS Meeting Abstracts. 2026;MA2026-01(1):49-49. doi:10.1149/ma2026-01149mtgabs

BibTeX
@article{Kong2026,
  author = {Kong, Dongjae and Li, Yuzhe and Ju, Kyoungjae and An, Jihwan and Zheng, Xiaolin},
  title = {Ultrafast Flame Exsolution of High-Density Metal Nanoparticles on Perovskite Oxides},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {1},
  pages = {49--49},
  doi = {10.1149/ma2026-01149mtgabs}
}
Kostenlos starten →