EUVIMEDEUVIMED entdecken
Crossref

Geometry-Engineered Reaction Dynamics for Wafer-Scale 2D Semiconductor Growth

Dongho Lee, Seowoo Son, Taesung Kim

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (13) · 989-989

DOI: 10.1149/ma2026-0113989mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Dongho Lee und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two-dimensional transition metal dichalcogenides are promising channel materials for back-end-of-line (BEOL) compatible logic, but wafer-scale growth by atmospheric-pressure CVD still suffers from strong radial non-uniformity, random nucleation, and uncontrolled bilayer formation. In a conventional “wafer-on-block” configuration, the precursor boundary layer is thin and highly non-uniform, which leads to a sharp overshoot of local supersaturation near the wafer edge and fast vertical nucleation on existing domains. As a result, the temporal window where only the first layer nucleates is extremely narrow, and monolayer WS 2 is quickly contaminated by second-layer islands and thicker crystallites. Overcoming this kinetic crowding without relying on complex hardware or ultra-low pressures is a key requirement for making 2D materials compatible with practical semiconductor manufacturing. In this work, we demonstrate that a simple geometric degree of freedom—the gap between the wafer and the underlying thermal block—can be used as an effective knob to engineer the local reaction environment. We perform CFD simulations of a horizontal APCVD reactor that explicitly include the reactor tube, wafer, thermal block, and a tunable wafer–block gap under realistic carrier-gas flow and temperature profiles. The simulations resolve the spatial distribution of temperature, total pressure, and tungsten and sulfur precursor partial pressures above the wafer as a function of radial position and gap height. Introducing a millimeter-scale gap is found to create a quasi-static diffusion pocket in which the flow becomes laminar, sulfur is in large excess, and the tungsten precursor is supply-limited. Under these conditions, the initial supersaturation spike is strongly suppressed, and the radial gradient of local supersaturation sigma(t,r) is flattened, which slows down vertical stacking while allowing the first-layer nuclei to expand laterally. Guided by this analysis, we experimentally implement a gap-engineered APCVD process for WS 2 on wafer-scale sapphire substrates. By co-optimizing gap height, carrier-gas flow, and precursor ramping, we realize a growth window where first-layer nucleation is spatially dense, but second-layer nucleation is significantly delayed in time. Optical microscopy confirms continuous WS 2 coverage and a dramatic reduction of thick crystallites compared to the zero-gap configuration. Raman and photoluminescence mapping across the wafer show uniform peak positions and intensity ratios consistent with monolayer WS 2 , and AFM measurements verify that bilayer islands are largely suppressed and confined to isolated defect sites. The observed improvements in uniformity and thickness control are in good agreement with the CFD-predicted trends in local supersaturation and diffusion length. These results establish geometry-directed reaction dynamics as a powerful and scalable strategy for controlling nucleation and layer number in 2D semiconductor CVD, without resorting to complex precursor chemistries or vacuum systems. Because the concept relies only on simple gap and flow engineering, it is readily extendable to other transition metal dichalcogenides, different reactor sizes, and BEOL-compatible substrates where thermal budget and process simplicity are critical. More broadly, the work highlights that careful engineering of the wafer–environment geometry can serve as an additional degree of freedom, on par with temperature, pressure, and precursor chemistry, for enabling manufacturable wafer-scale 2D material integration. This work was supported by the Technology Innovation Program (Public-private joint investment semiconductor R&D program(K-CHIPS) to foster high-quality human resources)(RS-2023-00235484, "Development of High Quality MX2 Materials and Processes through In-situ Defect Analysis") funded By the Ministry of Trade, Industry & Energy(MOTIE, Korea)(1415187770)

Zitieren

APA

Lee, D., Son, S., & Kim, T. (2026). Geometry-Engineered Reaction Dynamics for Wafer-Scale 2D Semiconductor Growth. ECS Meeting Abstracts, MA2026-01(13), 989-989. https://doi.org/10.1149/ma2026-0113989mtgabs

Vancouver

Lee D, Son S, Kim T. Geometry-Engineered Reaction Dynamics for Wafer-Scale 2D Semiconductor Growth. ECS Meeting Abstracts. 2026;MA2026-01(13):989-989. doi:10.1149/ma2026-0113989mtgabs

BibTeX
@article{Lee2026,
  author = {Lee, Dongho and Son, Seowoo and Kim, Taesung},
  title = {Geometry-Engineered Reaction Dynamics for Wafer-Scale 2D Semiconductor Growth},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {13},
  pages = {989--989},
  doi = {10.1149/ma2026-0113989mtgabs}
}
Kostenlos starten →