EUVIMEDEUVIMED entdecken
Crossref

Green Hydrogen Production via Methanol Electrolysis

Yao Zhu, Liang An

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 34-34

DOI: 10.1149/ma2026-01134mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Yao Zhu und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen, owing to its high energy density and environmentally benign, zero-emission characteristics, is regarded as a supremely promising energy carrier for a sustainable future. While conventional thermochemical production methods, such as methanol cracking, have been explored due to their relatively lower operating temperatures, these routes typically impose harsh operational requirements and necessitate energy-intensive purification of the final hydrogen product. In contrast, electrochemical methanol electrolysis (MEO) presents a highly attractive and energy-efficient alternative, operating effectively below 100 °C with a remarkably low theoretical potential of merely 0.02 V (significantly lower than the 1.23 V required for water splitting). This study reports the development and optimization of a proton exchange membrane (PEM)-based methanol electrolyzer for efficient hydrogen generation, leveraging the PEM configuration for high current density and compactness. The core component, a catalyst-coated membrane (CCM), was fabricated. Strategically, commercial PtRu/C was employed at the anode, aiming to utilize the ruthenium sites to accelerate the removal of CO intermediate species and thus significantly enhance methanol oxidation reaction kinetics. Pt/C was used at the cathode. Through meticulous system optimization, including the precise tuning of key operational parameters (e.g., operation temperature) and critical engineering parameters (e.g., membrane thickness), the developed electrolyzer demonstrated exceptional performance, achieving a high current density of 2.5 A cm -2 at an exceptionally low input potential of only 1.09 V. Furthermore, the device exhibited outstanding long-term durability, sustaining stable operation for over 1000 hours with an extremely low degradation rate of merely 47 µV h -1 . Crucially, the produced hydrogen maintains purity exceeding 98%, indicating minimal methanol crossover and robustly affirming the viability of this approach for practical, high-purity hydrogen production. KEYWORDS : Hydrogen production; Methanol oxidation; Electrolyzer ACKNOWLEDGE : This work was fully supported by a grant from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. 15308024).

Zitieren

APA

Zhu, Y., & An, L. (2026). Green Hydrogen Production via Methanol Electrolysis. ECS Meeting Abstracts, MA2026-01(1), 34-34. https://doi.org/10.1149/ma2026-01134mtgabs

Vancouver

Zhu Y, An L. Green Hydrogen Production via Methanol Electrolysis. ECS Meeting Abstracts. 2026;MA2026-01(1):34-34. doi:10.1149/ma2026-01134mtgabs

BibTeX
@article{Zhu2026,
  author = {Zhu, Yao and An, Liang},
  title = {Green Hydrogen Production via Methanol Electrolysis},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {1},
  pages = {34--34},
  doi = {10.1149/ma2026-01134mtgabs}
}
Kostenlos starten →