Lowering Interfacial Resistance at the NaSICON Interface for Use in Molten Sodium Batteries
ECS Advances · 11.11.2026
DOI: 10.1149/2754-2734/aec0b6 ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Advances, online erschienen am 11.11.2026. Verfasst von Jake Kattelman und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nevada Gold Mines.
Abstract (Originalsprache)
Molten Na batteries have typical operating temperatures of 300-350°C, requiring complex thermal management and specialized seals. Lowering the operating temperature to less than 150°C would improve the economic feasibility of large-scale molten Na energy storage. The use of Hg metal as a positive electrode enables an operating temperature below 150°C when paired with a Na superionic conductor (NaSICON) solid-state electrolyte. However, poor wetting of NaSICON by liquid Hg increases interfacial resistance and limits achievable current density. In this work, Pt, Cu, and Ag coatings were investigated as a route to improve Hg wetting of NaSICON and reduce the interfacial resistance. The Pt coating lowered the Hg contact angle from 114° (bare NaSICON) to 100°, reduced symmetric-cell impedance nearly seven-fold (18.15 vs. 2.64 Ω cm² at low-frequency), and decreased overpotential nearly four-fold at 0.5 mA cm⁻² (-0.08 V vs. -0.02 V), while forming a stable, coherent film after cycling. Cu and Ag coatings instead worsened the contact angle (135–139°), increased impedance and overpotential relative to bare NaSICON, and were largely stripped from the electrode during testing. Based on these results, a Pt coating on the NaSICON is recommended for improving Hg wetting and lowering interfacial resistance in molten Na-Hg batteries.
Förderung
- Nevada Gold Mines
Zitieren
APA
Kattelman, J., & Chidambaram, D. (2026). Lowering Interfacial Resistance at the NaSICON Interface for Use in Molten Sodium Batteries. ECS Advances. https://doi.org/10.1149/2754-2734/aec0b6
Vancouver
Kattelman J, Chidambaram D. Lowering Interfacial Resistance at the NaSICON Interface for Use in Molten Sodium Batteries. ECS Advances. 2026. doi:10.1149/2754-2734/aec0b6
BibTeX
@article{Kattelman2026,
author = {Kattelman, Jake and Chidambaram, Dev},
title = {Lowering Interfacial Resistance at the NaSICON Interface for Use in Molten Sodium Batteries},
journal = {ECS Advances},
year = {2026},
doi = {10.1149/2754-2734/aec0b6}
}
EUVIMED