EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward Practical High-Power Li–S Batteries: 3D Graphene Cathode Design and Flight-Validated Pack Integration

Md Sajibul Alam Bhuyan, Ferdaushi A Bipasha, Jessica A Mercier, David O Olawale

ECS Advances · 01.12.2026 · 5 (4) · 040503

DOI: 10.1149/2754-2734/aeb709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Advances, online erschienen am 30.10.2026. Verfasst von Md Sajibul Alam Bhuyan und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Air Force Office of Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium–sulfur (Li–S) batteries are promising next-generation energy-storage systems, but practical use remains limited by poor rate capability, polysulfide shuttling, and scalable cell-design challenges. Here, we present a materials-to-system strategy for high-power Li–S batteries built on an optimized sulfur-graphene cathode. Comparing 2D and 3D graphene frameworks, we show that interconnected 3D graphene yields higher areal capacity, lower polarization growth, and better cycling stability than 2D graphene, consistent with improved sulfur retention and more stable interfacial kinetics. The cathode was translated from coin cells to multilayer pouch cells fabricated via roll-to-roll processing, with controlled sulfur loading, electrolyte-to-sulfur ratio, and negative-to-positive capacity balance. Scaling from 300 mAh to 3 Ah pouch cells achieved specific energy densities exceeding 300 Wh kg −1 at the cell level and ∼250 Wh kg −1 at the pack level while retaining high-rate capability. A 7S-2P Li–S pack built from these cells powered a 6 Ah quadcopter drone under realistic flight conditions, confirming stable power delivery and thermal robustness. This work establishes a scalable pathway for Li–S batteries, positioning sulfur-3D graphene cathodes as a viable platform for high-power energy storage in UAVs, electric vehicles, and advanced mobility systems.

Förderung

  • Air Force Office of Scientific Research

Zitieren

APA

Bhuyan, M. S. A., Bipasha, F. A., Mercier, J. A., & Olawale, D. O. (2026). Toward Practical High-Power Li–S Batteries: 3D Graphene Cathode Design and Flight-Validated Pack Integration. ECS Advances, 5(4), 040503. https://doi.org/10.1149/2754-2734/aeb709

Vancouver

Bhuyan MSA, Bipasha FA, Mercier JA, Olawale DO. Toward Practical High-Power Li–S Batteries: 3D Graphene Cathode Design and Flight-Validated Pack Integration. ECS Advances. 2026;5(4):040503. doi:10.1149/2754-2734/aeb709

BibTeX
@article{Bhuyan2026,
  author = {Bhuyan, Md Sajibul Alam and Bipasha, Ferdaushi A and Mercier, Jessica A and Olawale, David O},
  title = {Toward Practical High-Power Li–S Batteries: 3D Graphene Cathode Design and Flight-Validated Pack Integration},
  journal = {ECS Advances},
  year = {2026},
  volume = {5},
  number = {4},
  pages = {040503},
  doi = {10.1149/2754-2734/aeb709}
}
Kostenlos starten →