EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements

Ranon Fuller, Cameron Vann, Devin Rappleye

ECS Advances · 01.06.2026 · 5 (2) · 022503

DOI: 10.1149/2754-2734/ae7813 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Advances, online erschienen am 18.06.2026. Verfasst von Ranon Fuller und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Nuclear Leadership Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rotating electrodes have several advantages over static electrodes in molten salts such as their ability to replicate in situ hydrodynamic conditions, dwarf the effect of natural convection and temperature gradients, and measure electrochemical kinetics at high rotational rates. Regressing accurate hydrodynamic correlations for rotating electrodes in molten salts requires precise knowledge of certain system properties such as analyte concentrations, diffusion coefficients, electrode areas, and viscosities. In this work, we present our methods and data analysis to determine these properties for SmCl 3 in LiCl-KCl at 722 K, CrCl 2 in LiCl-KCl at 784 K, and SmCl 3 at 981 K to complete the regression of our hydrodynamic correlation for rotating rod electrodes (RREs) in Part II of this work. Specifically, we determined analyte concentrations using inductively coupled plasma mass spectrometry (ICP-MS), oxygen contamination using back titration, electrochemical solution resistance using electrochemical impedance spectroscopy (EIS), electrode areas using cyclic voltammetry (CV), diffusion coefficients using CV, chronopotentiometry (CP), and chronoamperometry (CA), and the viscosity of LiCl-KCl eutectic using a regression of literature data. This analysis resulted in accepted diffusion coefficients of 5.50 × 10 −6 cm 2 -s −1 for SmCl 3 in LiCl-KCl, 1.44 × 10 −5 cm 2 -s −1 for CrCl 2 in LiCl-KCl, and 2.98 × 10 −5 Cm 2 -s −1 for SmCl 3 in NaCl-KCl.

Förderung

  • University Nuclear Leadership Program

Zitieren

APA

Fuller, R., Vann, C., & Rappleye, D. (2026). Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements. ECS Advances, 5(2), 022503. https://doi.org/10.1149/2754-2734/ae7813

Vancouver

Fuller R, Vann C, Rappleye D. Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements. ECS Advances. 2026;5(2):022503. doi:10.1149/2754-2734/ae7813

BibTeX
@article{Fuller2026,
  author = {Fuller, Ranon and Vann, Cameron and Rappleye, Devin},
  title = {Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements},
  journal = {ECS Advances},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {022503},
  doi = {10.1149/2754-2734/ae7813}
}
Kostenlos starten →