EUVIMEDEUVIMED entdecken
Crossref

Precise Control of Wafer Edge Removal Profile in Chemical Mechanical Polishing

Takashi Fujita

ECS Journal of Solid State Science and Technology · 01.07.2026 · 15 (7) · 074001

DOI: 10.1149/2162-8777/ae8330 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Journal of Solid State Science and Technology, online erschienen am 16.07.2026. Verfasst von Takashi Fujita. Die Arbeit nennt 15 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise control of polishing approximately 1 mm from the edge of an oxide film on a silicon wafer requires secure wafer fixation in the chuck to correct warpage and rigid alignment of the retainer ring relative to the wafer. Stable edge polishing therefore depends strongly on accurately setting the retainer ring gap and height. In this study, material removal near the wafer edge was evaluated under conditions in which the relative positions of the wafer and retainer ring were fixed using a polishing pad mechanism supported by an elastic material. This configuration enabled independent examination of the effects of retainer height and gap on edge removal behavior. At a position 1 mm from the wafer edge, increasing the retainer height by 1 µm reduced the removal amount by approximately 45 nm, whereas increasing the retainer gap by 1 mm increased the removal amount by 555 nm. Both parameters exhibited a significant influence on edge material removal. These findings demonstrate that precise adjustment and control of retainer ring height and gap are essential for achieving stable polishing performance and a well defined wafer edge profile.

Zitieren

APA

Fujita, T. (2026). Precise Control of Wafer Edge Removal Profile in Chemical Mechanical Polishing. ECS Journal of Solid State Science and Technology, 15(7), 074001. https://doi.org/10.1149/2162-8777/ae8330

Vancouver

Fujita T. Precise Control of Wafer Edge Removal Profile in Chemical Mechanical Polishing. ECS Journal of Solid State Science and Technology. 2026;15(7):074001. doi:10.1149/2162-8777/ae8330

BibTeX
@article{Fujita2026,
  author = {Fujita, Takashi},
  title = {Precise Control of Wafer Edge Removal Profile in Chemical Mechanical Polishing},
  journal = {ECS Journal of Solid State Science and Technology},
  year = {2026},
  volume = {15},
  number = {7},
  pages = {074001},
  doi = {10.1149/2162-8777/ae8330}
}
Kostenlos starten →