Experimental Feasibility-Driven Spacer Material Engineering for Improved Performance in Novel E-shaped Nanosheet FET at Sub-5 Nm Technology Node: Device to Circuit Level Insights
ECS Journal of Solid State Science and Technology · 01.07.2026 · 15 (7) · 075003
DOI: 10.1149/2162-8777/ae805a ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Journal of Solid State Science and Technology, online erschienen am 10.07.2026. Verfasst von R Prajwal und 3 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
This work presents the first comprehensive investigation of spacer engineering in a novel E-shaped Gate-All-Around (GAA) nanosheet (NS) FET at sub-5 nm node, where the primary novelty lies in the introduction of the E-shaped channel geometry to enhance electrostatic control and effective channel width. Analysis of both single-κ and dual- κ spacers is provided for digital, analog/RF, and circuit designs. The single- κ spacers exhibit substantial benefits from higher κ value ranging from 1 to 39 in achieving better on-off current ratio ( I ON / I OFF ) and reduced subthreshold swing (∼9%), along with enhanced intrinsic gain (∼42%), even though it leads to three times higher gate capacitance and 2.1 times more delay penalty in the CMOS inverter circuit. This drawback can be addressed using the dual- κ spacers, where high- κ materials are used closer to the gate, while low- κ is near the source/drain junction. Therefore, the value of C GG is lowered by nearly 29%, in comparison with high- k single spacers, while keeping good electrostatic properties. The dual- κ spacer structures using TiO 2 (D2, D4, D6) show a decrease of about 64% for I OFF , as well as better analog performance. Additionally, circuit-level CMOS inverter simulation results for the dual- κ configuration reveal a higher noise margin and gain with controllable delay in comparison with the single- κ spacer structures.
Zitieren
APA
Prajwal, R., Valasa, S., Kotha, V. R., & Mounika, B. (2026). Experimental Feasibility-Driven Spacer Material Engineering for Improved Performance in Novel E-shaped Nanosheet FET at Sub-5 Nm Technology Node: Device to Circuit Level Insights. ECS Journal of Solid State Science and Technology, 15(7), 075003. https://doi.org/10.1149/2162-8777/ae805a
Vancouver
Prajwal R, Valasa S, Kotha VR, Mounika B. Experimental Feasibility-Driven Spacer Material Engineering for Improved Performance in Novel E-shaped Nanosheet FET at Sub-5 Nm Technology Node: Device to Circuit Level Insights. ECS Journal of Solid State Science and Technology. 2026;15(7):075003. doi:10.1149/2162-8777/ae805a
BibTeX
@article{Prajwal2026,
author = {Prajwal, R and Valasa, Sresta and Kotha, Venkata Ramakrishna and Mounika, B},
title = {Experimental Feasibility-Driven Spacer Material Engineering for Improved Performance in Novel E-shaped Nanosheet FET at Sub-5 Nm Technology Node: Device to Circuit Level Insights},
journal = {ECS Journal of Solid State Science and Technology},
year = {2026},
volume = {15},
number = {7},
pages = {075003},
doi = {10.1149/2162-8777/ae805a}
}
EUVIMED