TCAD Analysis of Etching-Depth-Dependent Electrical Behavior in p-GaN Gate AlGaN/GaN HEMTs
ECS Journal of Solid State Science and Technology · 01.05.2026 · 15 (5) · 055006
DOI: 10.1149/2162-8777/ae6948 ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Journal of Solid State Science and Technology, online erschienen am 18.05.2026. Verfasst von Tsung-I Liao und 4 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: National Science and Technology Council.
Abstract (Originalsprache)
This work presents a comprehensive TCAD investigation of p-GaN etching-depth variation in enhancement-mode (E-mode) AlGaN/GaN high electron mobility transistors (HEMTs), calibrated with experimental ICP etching conditions. Three representative scenarios were examined: nominal etch depth, residual p-GaN (under-etch), and over-etch into the AlGaN barrier. In the residual regime, the remaining p-GaN forms a p–i–n-like junction with the underlying heterostructure, altering the electrostatic distribution and partially depleting the two-dimensional electron gas (2DEG). As the residual thickness increases, both the threshold voltage ( V th ) and ON resistance ( R ON ) exhibit a rapid increase followed by saturation, reflecting the strong sensitivity of channel electrostatics to small residual variations. In contrast, over-etching into the AlGaN barrier reduces the effective barrier thickness and weakens carrier confinement, thereby reducing 2DEG density. This leads to a simultaneous increase in V th and R ON due to reduced channel conductivity and altered voltage distribution. A ±0.2 V V th tolerance was adopted to define a quantitative process window of approximately –0.8 to +1.2 nm relative to the nominal etch depth, within which stable E-mode operation is maintained. These results clarify the electrostatic origins of etch-depth-induced V th and R ON variations and provide a predictive guideline for process optimization in p-GaN gate HEMT fabrication.
Förderung
- National Science and Technology Council
Zitieren
APA
Liao, T., Kuo, C., Chang, S., Chen, J., & Chang, S. (2026). TCAD Analysis of Etching-Depth-Dependent Electrical Behavior in p-GaN Gate AlGaN/GaN HEMTs. ECS Journal of Solid State Science and Technology, 15(5), 055006. https://doi.org/10.1149/2162-8777/ae6948
Vancouver
Liao T, Kuo C, Chang S, Chen J, Chang S. TCAD Analysis of Etching-Depth-Dependent Electrical Behavior in p-GaN Gate AlGaN/GaN HEMTs. ECS Journal of Solid State Science and Technology. 2026;15(5):055006. doi:10.1149/2162-8777/ae6948
BibTeX
@article{Liao2026,
author = {Liao, Tsung-I and Kuo, Chun-Chih and Chang, Sheng-Po and Chen, Jone-Fang and Chang, Shoou-Jinn},
title = {TCAD Analysis of Etching-Depth-Dependent Electrical Behavior in p-GaN Gate AlGaN/GaN HEMTs},
journal = {ECS Journal of Solid State Science and Technology},
year = {2026},
volume = {15},
number = {5},
pages = {055006},
doi = {10.1149/2162-8777/ae6948}
}
EUVIMED