EUVIMEDEUVIMED entdecken
Crossref

Effects of Diethoxymethylsilane/Helium Flow Rate Ratio on Low-k Films Deposited by Plasma-Enhanced Chemical Vapor Deposition

Chanyong Seo, Namwuk Baek, Yoonsoo Park, Hyuna Lim, Sungwoo Lee, Jeayoung Yang, Seonhee Jang, Donggeun Jung

ECS Journal of Solid State Science and Technology · 02.09.2024 · 13 (9) · 093008

DOI: 10.1149/2162-8777/ad7900 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Journal of Solid State Science and Technology, online erschienen am 19.09.2024. Verfasst von Chanyong Seo und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: SungKyunKwan University and the BK21 FOUR, Industrial Strategic Technology Development Program, Basic Science Research Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As the semiconductor industry has continuously reduced the integrated circuit (IC) chip size, a resistance-capacitance (RC) delay emerged, causing deterioration of the chip performance. To reduce the RC delay, low dielectric constant (low- k ) films with suitable mechanical strengths have been adopted as intermetal dielectrics (IMDs). In this study, low- k plasma-polymerized diethoxymethylsilane (ppDEMS) films were fabricated by plasma-enhanced chemical vapor deposition of the DEMS precursor with a flow rate ratio of the DEMS precursor to helium (He) carrier gas (DEMS/He FRR) as a key parameter. As the DEMS/He FRR increased, the refractive index was reduced from 1.401 to 1.386, and the k value decreased from 2.77 to 2.10. From high-resolution scans of C1s, O1s, and Si2p peaks of X-ray photoelectron spectroscopy, the carbon contents increased, and the oxygen contents decreased, along with a decrease in the film density. With the increased DEMS/He FRR, hardness decreased from 2.5 to 1.8 GPa, and elastic modulus decreased from 17.08 to 11.50 GPa. Leakage current densities for all the ppDEMS films were less than 10 −7 A cm −2 at 1 MV cm −1 . The ppDEMS films could be suggested as the IMDs according to their electrical and mechanical performance.

Förderung

  • SungKyunKwan University and the BK21 FOUR
  • Industrial Strategic Technology Development Program
  • Basic Science Research Program

Zitieren

APA

Seo, C., Baek, N., Park, Y., Lim, H., Lee, S., Yang, J., Jang, S., & Jung, D. (2024). Effects of Diethoxymethylsilane/Helium Flow Rate Ratio on Low-k Films Deposited by Plasma-Enhanced Chemical Vapor Deposition. ECS Journal of Solid State Science and Technology, 13(9), 093008. https://doi.org/10.1149/2162-8777/ad7900

Vancouver

Seo C, Baek N, Park Y, Lim H, Lee S, Yang J, et al. Effects of Diethoxymethylsilane/Helium Flow Rate Ratio on Low-k Films Deposited by Plasma-Enhanced Chemical Vapor Deposition. ECS Journal of Solid State Science and Technology. 2024;13(9):093008. doi:10.1149/2162-8777/ad7900

BibTeX
@article{Seo2024,
  author = {Seo, Chanyong and Baek, Namwuk and Park, Yoonsoo and Lim, Hyuna and Lee, Sungwoo and Yang, Jeayoung and Jang, Seonhee and Jung, Donggeun},
  title = {Effects of Diethoxymethylsilane/Helium Flow Rate Ratio on Low-k Films Deposited by Plasma-Enhanced Chemical Vapor Deposition},
  journal = {ECS Journal of Solid State Science and Technology},
  year = {2024},
  volume = {13},
  number = {9},
  pages = {093008},
  doi = {10.1149/2162-8777/ad7900}
}
Kostenlos starten →