Electrodeposited ZnCo Processed by Microwave Plasma Generated Using a Household Microwave Oven
Journal of The Electrochemical Society · 18.11.2026
DOI: 10.1149/1945-7111/aec3d9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 18.11.2026. Verfasst von Cheng-Yao Wang und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Taiwan, National Science and Technology Council, Taiwan.
Abstract (Originalsprache)
In this work, a modified household microwave oven was used to generate microwave plasma in a vacuum-sealed tube, providing a simple and low-cost route for microwave plasma post-treatment of materials. Surface and structural analyses, including water contact angle measurement, SEM, EDS, XRD, and XPS, show that microwave plasma treatment modifies the surface morphology, elemental distribution, and near-surface chemical states of the electrodeposited layer. XRD suggests the presence of Zn/Co oxide-related phases, while XPS reveals an increased Co3+-related contribution and a higher fraction of hydroxyl-/adsorbate-related oxygen species after plasma treatment. These results indicate that microwave plasma treatment mainly affects the surface/interface characteristics of the Zn-Co-based electrode. When assembled into flexible symmetric supercapacitor devices, the sample processed by microwave plasma for 3 s exhibits higher CV-derived device capacitance, lower fitted interfacial resistance, and improved long-term cycling response compared with the as-deposited sample. The devices also maintain functional charge-storage behavior under bending deformation. These findings suggest that household microwave-generated plasma can serve as a rapid and low-cost surface modification strategy for Zn-Co-based flexible electrodes, showing potential for flexible supercapacitor applications.
Förderung
- Ministry of Education, Taiwan
- National Science and Technology Council, Taiwan
Zitieren
APA
Wang, C., Yan, P., Chen, L., Huang, Y., Huang, Y., Lu, N. H., Chen, C., Cheng, I., & Chen, J. (2026). Electrodeposited ZnCo Processed by Microwave Plasma Generated Using a Household Microwave Oven. Journal of The Electrochemical Society. https://doi.org/10.1149/1945-7111/aec3d9
Vancouver
Wang C, Yan P, Chen L, Huang Y, Huang Y, Lu NH, et al. Electrodeposited ZnCo Processed by Microwave Plasma Generated Using a Household Microwave Oven. Journal of The Electrochemical Society. 2026. doi:10.1149/1945-7111/aec3d9
BibTeX
@article{Wang2026,
author = {Wang, Cheng-Yao and Yan, Pei-Yi and Chen, Lu-Hong and Huang, Yi-Der and Huang, YuSheng and Lu, Nian Hu and Chen, Chih-Hsuan and Cheng, I-Chun and Chen, Jian-Zhang},
title = {Electrodeposited ZnCo Processed by Microwave Plasma Generated Using a Household Microwave Oven},
journal = {Journal of The Electrochemical Society},
year = {2026},
doi = {10.1149/1945-7111/aec3d9}
}
EUVIMED