EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Effect of Cycling Protocol on the Stress and Mechanical Degradation of Hard Carbon Electrodes

Amit Chanda, Abdulrahman Alfadhli, Vijay Anand Sethuraman, Siva Prasad Varma Nadimpalli

Journal of The Electrochemical Society · 16.11.2026

DOI: 10.1149/1945-7111/aec2ae ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 16.11.2026. Verfasst von Amit Chanda und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Directorate for Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Maximum stress experienced by an electrode during cycling is shown to cause mechanical degradation and capacity fade, but the effect of potential window and stress range (Δσ) on cycling behavior was not investigated. Here, stresses generated in hard carbon (HC)-based porous composite electrodes were measured in situ while cycling under three different potential windows: (i) full window (2-0.0005 V vs Na/Na+), (ii) sloping (2-0.1 V vs Na/Na+), and plateau (0.1-0.0005 V vs Na/Na+) regions and three different C-rates. The stress range (Δσ), capacity, and mechanical hysteresis during sloping region were nearly rate-independent, while they showed significant rate dependence in the plateau region, suggesting two different ion-storage mechanisms. Both the stress range and mechanical hysteresis (indicator of irreversible deformation) increased at lower current densities during the plateau region, indicating higher irreversible mechanical work and degradation. During extended cycling, capacity continued to decrease even after the maximum stress saturated, indicating that Δσ and hysteresis are important to explain electrode degradation. Based on these observations, an optimized cycling protocol was used which reduced stress range and mechanical hysteresis while increasing specific capacity at faster rate, demonstrating the importance of coupled electro-chemomechanical responses for optimizing cycling protocols to improve capacity utilization and mechanical durability.

Förderung

  • Directorate for Engineering

Zitieren

APA

Chanda, A., Alfadhli, A., Sethuraman, V. A., & Nadimpalli, S. P. V. (2026). Effect of Cycling Protocol on the Stress and Mechanical Degradation of Hard Carbon Electrodes. Journal of The Electrochemical Society. https://doi.org/10.1149/1945-7111/aec2ae

Vancouver

Chanda A, Alfadhli A, Sethuraman VA, Nadimpalli SPV. Effect of Cycling Protocol on the Stress and Mechanical Degradation of Hard Carbon Electrodes. Journal of The Electrochemical Society. 2026. doi:10.1149/1945-7111/aec2ae

BibTeX
@article{Chanda2026,
  author = {Chanda, Amit and Alfadhli, Abdulrahman and Sethuraman, Vijay Anand and Nadimpalli, Siva Prasad Varma},
  title = {Effect of Cycling Protocol on the Stress and Mechanical Degradation of Hard Carbon Electrodes},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  doi = {10.1149/1945-7111/aec2ae}
}
Kostenlos starten →