Impact of Electrolyte Feed and Catalyst-Coated Substrate Properties on Cell Performance and Hydrogen Crossover in AEM Water Electrolysis
Journal of The Electrochemical Society · 28.07.2026 · 173 (14) · 144503
DOI: 10.1149/1945-7111/ae87d5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 17.07.2026. Verfasst von Jan Witte und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Niedersächsisches Ministerium für Wissenschaft und Kultur, Bundesministerium für Forschung, Technologie und Raumfahrt.
Abstract (Originalsprache)
Hydrogen crossover is a major challenge in anion exchange membrane water electrolysis (AEMWE), affecting both efficiency and operational safety. In this study, the combined effect of cathode feed configuration (wet vs dry cathode) and catalyst-coated substrate (CCS) properties on cell performance and hydrogen crossover are systematically investigated. Two cathode CCS types are evaluated, including a commercially available and an in-house manufactured variant prepared by hand-spraying (0.5 mg cm − 2 Pt), using identical anodic CCS. The in-house CCS delivers improved cell performance in wet cathode configuration (1.79 V at 3 A cm − 2 ) but leads to more than doubled hydrogen to oxygen (HTO) content compared to the commercial CCS (0.71 vs 0.29 vol%). Switching from wet to dry cathode configuration results in a significant reduction of HTO for both CCS types, while cell performance is only slightly affected. These findings highlight the importance of considering both cell voltage and hydrogen crossover when optimizing electrolyte feed strategy and cathodic catalyst layer design.
Förderung
- Niedersächsisches Ministerium für Wissenschaft und Kultur
- Bundesministerium für Forschung, Technologie und Raumfahrt
Zitieren
APA
Witte, J., Trinke, P., Bensmann, B., Becker, M., Olszok, V., Weber, A. P., Hanke-Rauschenbach, R., & Turek, T. (2026). Impact of Electrolyte Feed and Catalyst-Coated Substrate Properties on Cell Performance and Hydrogen Crossover in AEM Water Electrolysis. Journal of The Electrochemical Society, 173(14), 144503. https://doi.org/10.1149/1945-7111/ae87d5
Vancouver
Witte J, Trinke P, Bensmann B, Becker M, Olszok V, Weber AP, et al. Impact of Electrolyte Feed and Catalyst-Coated Substrate Properties on Cell Performance and Hydrogen Crossover in AEM Water Electrolysis. Journal of The Electrochemical Society. 2026;173(14):144503. doi:10.1149/1945-7111/ae87d5
BibTeX
@article{Witte2026,
author = {Witte, Jan and Trinke, Patrick and Bensmann, Boris and Becker, Maik and Olszok, Vinzent and Weber, Alfred P. and Hanke-Rauschenbach, Richard and Turek, Thomas},
title = {Impact of Electrolyte Feed and Catalyst-Coated Substrate Properties on Cell Performance and Hydrogen Crossover in AEM Water Electrolysis},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {14},
pages = {144503},
doi = {10.1149/1945-7111/ae87d5}
}
EUVIMED