EUVIMEDEUVIMED entdecken
Crossref

Diffusion-Regulated Cathodic Electrodeposition of Cr-Fe-Co-Ni Multicomponent Amorphous Electrocatalysts on a Nickel Foam for Integrated Alkaline Water Splitting

Zuowei Liu, Kyotaro Ono, Yuto Kuroki, Yu Otani, Kazuhiro Fukami

Journal of The Electrochemical Society · 26.06.2026 · 173 (12) · 122502

DOI: 10.1149/1945-7111/ae7d5e ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 24.06.2026. Verfasst von Zuowei Liu und 4 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Gefördert von: Support for Pioneering Research Initiated by the Next Generation, Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-entropy and medium-entropy alloys are attractive electrocatalysts for alkaline water splitting, yet it remains difficult to fabricate compositionally uniform coatings of multicomponent alloys on porous nickel foams by conventional routes. Here, we address this challenge using a diffusion-regulated, potential-controlled electrodeposition strategy enabled by a microphase-separated 1-butyl-3-methylimidazolium chloride–H 2 O mixture as the electrolytic solution, which restricts multi-ion mass transport and promotes synchronized co-deposition. By tuning the applied cathodic potential, we selectively obtain either an amorphous Cr-Fe-Co-Ni multicomponent metallic coating or a Cr-Fe-Co-Ni hydroxide layer directly on a nickel foam within a single electrolyte bath. The electrodeposited Cr-Fe-Co-Ni exhibits a homogeneous amorphous structure with a coral-like porous morphology and a markedly increased electrochemically accessible surface area, leading to the efficient hydrogen evolution reaction activity ( η 10 = 71.1 mV; η 100 = 193 mV). The Cr-Fe-Co-Ni hydroxide@nickel foam delivers the strong oxygen evolution reaction performance ( η 100 = 220 mV). When integrated as a Cr-Fe-Co-Ni ‖ Cr-Fe-Co-Ni hydroxide electrolyzer, the device achieves low cell voltages (1.55 V at 10 mA cm −2 ; 1.84 V at 100 mA cm −2 ) and stable operation at 100 mA cm −2 for 24 h. This work provides a simple and scalable route to integrated medium-entropy alloys/hydroxide electrodes for durable overall water splitting.

Förderung

  • Support for Pioneering Research Initiated by the Next Generation
  • Japan Society for the Promotion of Science

Zitieren

APA

Liu, Z., Ono, K., Kuroki, Y., Otani, Y., & Fukami, K. (2026). Diffusion-Regulated Cathodic Electrodeposition of Cr-Fe-Co-Ni Multicomponent Amorphous Electrocatalysts on a Nickel Foam for Integrated Alkaline Water Splitting. Journal of The Electrochemical Society, 173(12), 122502. https://doi.org/10.1149/1945-7111/ae7d5e

Vancouver

Liu Z, Ono K, Kuroki Y, Otani Y, Fukami K. Diffusion-Regulated Cathodic Electrodeposition of Cr-Fe-Co-Ni Multicomponent Amorphous Electrocatalysts on a Nickel Foam for Integrated Alkaline Water Splitting. Journal of The Electrochemical Society. 2026;173(12):122502. doi:10.1149/1945-7111/ae7d5e

BibTeX
@article{Liu2026,
  author = {Liu, Zuowei and Ono, Kyotaro and Kuroki, Yuto and Otani, Yu and Fukami, Kazuhiro},
  title = {Diffusion-Regulated Cathodic Electrodeposition of Cr-Fe-Co-Ni Multicomponent Amorphous Electrocatalysts on a Nickel Foam for Integrated Alkaline Water Splitting},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {12},
  pages = {122502},
  doi = {10.1149/1945-7111/ae7d5e}
}
Kostenlos starten →