In-Operando Structural Health Monitoring of a Lithium-Ion Battery Module Using Piezoelectric Transducers
Journal of The Electrochemical Society · 26.06.2026 · 173 (12) · 120519
DOI: 10.1149/1945-7111/ae7cb9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 24.06.2026. Verfasst von Gregor Glanz und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Österreichische Forschungsförderungsgesellschaft.
Abstract (Originalsprache)
Structural health monitoring (SHM) using piezoelectric transducers has been widely explored for individual lithium-ion cells, yet its applicability at the module level remains largely unstudied. This work demonstrates the feasibility of SHM on a realistic battery module composed of four 60 Ah pouch cells and operated in a mechanically constrained setup similar to an electric-vehicle (EV) battery environment. In this configuration, breathing-induced stack pressure varies during cycling, and these pressure changes are captured simultaneously with the parameters of the propagating guided wave using a self-developed ultrasonic battery management system (UBMS). Measurements at two C-rates and two ambient temperatures show that the group velocity shifts by approximately 32 m s −1 between 25 °C and 10 °C, while cycling-induced stack pressure variations, corresponding to measured forces of up to 250 N, are reflected in a decrease of the normalized amplitude to values as low as 0.5. These findings demonstrate that piezoelectric SHM operates reliably in a realistic module-level environment. Moreover it shows sensitivity to pressure changes within the cell stack, providing a foundation for future diagnostic approaches that are able to identify safety-critical states through their impact on the cell’s mechanical behavior.
Förderung
- Österreichische Forschungsförderungsgesellschaft
Zitieren
APA
Glanz, G., Koller, M., Popp, H., Fröhlich, K., & Bergmann, A. (2026). In-Operando Structural Health Monitoring of a Lithium-Ion Battery Module Using Piezoelectric Transducers. Journal of The Electrochemical Society, 173(12), 120519. https://doi.org/10.1149/1945-7111/ae7cb9
Vancouver
Glanz G, Koller M, Popp H, Fröhlich K, Bergmann A. In-Operando Structural Health Monitoring of a Lithium-Ion Battery Module Using Piezoelectric Transducers. Journal of The Electrochemical Society. 2026;173(12):120519. doi:10.1149/1945-7111/ae7cb9
BibTeX
@article{Glanz2026,
author = {Glanz, Gregor and Koller, Markus and Popp, Hartmut and Fröhlich, Katja and Bergmann, Alexander},
title = {In-Operando Structural Health Monitoring of a Lithium-Ion Battery Module Using Piezoelectric Transducers},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {12},
pages = {120519},
doi = {10.1149/1945-7111/ae7cb9}
}
EUVIMED