Investigating the Effects of Surface Chemistry and Pore Structure in Grafted PEM Fuel Cell Catalyst Layers
Journal of The Electrochemical Society · 14.07.2026 · 173 (13) · 134503
DOI: 10.1149/1945-7111/ae79e1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 09.07.2026. Verfasst von Rens J. Horst und 1 weiteren Autor:innen. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Council, Toegepaste en Technische Wetenschappen, NWO.
Abstract (Originalsprache)
The carbon support surface chemistry strongly influences ionomer interactions, water management, and electrochemical performance in polymer electrolyte fuel cell catalyst layers; however, studies that decouple these effects from Pt particle size remain limited. Here, diazonium grafting is applied to commercial 40 wt% Pt/Vulcan and Pt/Ketjenblack catalysts to introduce five aryl functionalities (–NO 2 ,–NH 2 ,–CF 3 ,–COOH,–SO 3 H) spanning a wide range of polarities and wettabilities without altering Pt dispersion. Ex-situ characterization (X-ray photoelectron spectroscopy, thermogravimetric analysis, N 2 physisorption, contact angle, and dynamic vapor sorption) confirms successful functionalization and shows that grafting on Ketjenblack occurs preferentially at external surfaces, reducing pore accessibility. In 5 cm 2 single-cell tests, nitrogen-containing functionalities reduce cathode proton transport resistance, increasing current density at 0.7 V (1.20 vs 1.01 A cm −2 , I/C = 0.6). For hydrophilic and hydrophobic groups, optimal performance depends strongly on the ionomer-to-carbon ratio: hydrophilic functionalities enhance performance at low I/C (0.1) but become detrimental at higher I/C (0.6) due to increased water retention and unfavorable ionomer interactions. These effects are amplified for porous Ketjenblack, where pore blockage offsets gains from surface modification. These findings establish that surface functionalization and support porosity cannot be optimized independently, and suggest that next-generation mesoporous carbon supports could incorporate pore architectures compatible with surface modification.
Förderung
- European Research Council
- Toegepaste en Technische Wetenschappen, NWO
Zitieren
APA
Horst, R. J., & Forner-Cuenca, A. (2026). Investigating the Effects of Surface Chemistry and Pore Structure in Grafted PEM Fuel Cell Catalyst Layers. Journal of The Electrochemical Society, 173(13), 134503. https://doi.org/10.1149/1945-7111/ae79e1
Vancouver
Horst RJ, Forner-Cuenca A. Investigating the Effects of Surface Chemistry and Pore Structure in Grafted PEM Fuel Cell Catalyst Layers. Journal of The Electrochemical Society. 2026;173(13):134503. doi:10.1149/1945-7111/ae79e1
BibTeX
@article{Horst2026,
author = {Horst, Rens J. and Forner-Cuenca, Antoni},
title = {Investigating the Effects of Surface Chemistry and Pore Structure in Grafted PEM Fuel Cell Catalyst Layers},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {13},
pages = {134503},
doi = {10.1149/1945-7111/ae79e1}
}
EUVIMED