Interface Design and Optimization of Anode Catalyst Utilization in Water Electrolysis: Tomography-Based Modeling
Journal of The Electrochemical Society · 12.06.2026 · 173 (11) · 114509
DOI: 10.1149/1945-7111/ae7192 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 11.06.2026. Verfasst von Tien-Ching Ma und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Forschung, Technologie und Raumfahrt.
Abstract (Originalsprache)
Engineering the complex transport electrodes within proton exchange membrane water electrolysis (PEMWE) is a complex task: the anode catalyst layer (ACL) properties such as activity, electrical and ionic conductivities, permeability, thickness, contact angle, and its interface with the porous transport layer (PTL) significantly influence the performance of PEMWEs. To enable better exploitation of this interplay, this study presents a two-dimensional, two-phase model to capture the ACL dependence on its PTL interface structure, quantifying catalyst utilization. The model is validated against reference polarization curves, literature-based tomographic data, and an in-house constructed digital twin of the ACL. Simulation results reveal that catalyst utilization decreases with increasing electrode potential due to pronounced product transport limitations, which can already provide impulses to future electrode engineering. To mitigate these effects, balanced and high electrical and ionic conductivities and optimal pore size at the interface are analyzed by the model. The simulation results suggest an optimal pore size of ∼3 μm at ACL/PTL interface under constrained electrical conductivity, while larger pores (∼6 μm) are favored when conductivity is moderate. With an improved interface, the model shows that cell performance can be improved by 11.7% and 3.2%, respectively.
Förderung
- Bundesministerium für Forschung, Technologie und Raumfahrt
Zitieren
APA
Ma, T., Hutzler, A., Bierling, M., Schwarz, J., Hanke-Rauschenbach, R., & Thiele, S. (2026). Interface Design and Optimization of Anode Catalyst Utilization in Water Electrolysis: Tomography-Based Modeling. Journal of The Electrochemical Society, 173(11), 114509. https://doi.org/10.1149/1945-7111/ae7192
Vancouver
Ma T, Hutzler A, Bierling M, Schwarz J, Hanke-Rauschenbach R, Thiele S. Interface Design and Optimization of Anode Catalyst Utilization in Water Electrolysis: Tomography-Based Modeling. Journal of The Electrochemical Society. 2026;173(11):114509. doi:10.1149/1945-7111/ae7192
BibTeX
@article{Ma2026,
author = {Ma, Tien-Ching and Hutzler, Andreas and Bierling, Markus and Schwarz, Julian and Hanke-Rauschenbach, Richard and Thiele, Simon},
title = {Interface Design and Optimization of Anode Catalyst Utilization in Water Electrolysis: Tomography-Based Modeling},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {11},
pages = {114509},
doi = {10.1149/1945-7111/ae7192}
}
EUVIMED