Critical Crevice Temperature of 2205 Duplex Stainless Steel in Fe(III)/Fe(II)-Buffered Acidic Chloride Solutions
Journal of The Electrochemical Society · 14.05.2026 · 173 (9) · 091503
DOI: 10.1149/1945-7111/ae62b1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 12.05.2026. Verfasst von P. Zong und 3 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
The critical crevice temperature (CCT) of 2205 duplex stainless steel was evaluated in acidic chloride solutions representative of hydrometallurgical leach liquors (50 g·l −1 H 2 SO 4 , 0–15 g·l −1 Cl − ) containing the Fe(III)/Fe(II) redox couple at ratios of 1:10, 1:1, and 1000:1. Conventional electrochemical CCT methods are unreliable in redox-buffered environments. Under potentiostatic control, bulk Fe(II) oxidation dominated the measured current, obscuring the crevice corrosion response. Open-circuit potential (OCP) ramping overestimated CCT by up to 45 °C relative to immersion testing. This discrepancy arises from temperature-dependent acceleration of Fe(III)/Fe(II) redox kinetics, which increases exchange current density and reduces mixed-potential sensitivity to localized attack. Immersion testing was therefore required to obtain meaningful CCT values. Within 1–10 g·L −1 total Fe, CCT was insensitive to iron concentration at constant Fe(III)/Fe(II) ratio and chloride concentration, indicating that redox buffering—not total oxidant concentration—controls crevice stability. Increasing chloride decreased CCT from 98.7 °C to 39.9 °C, while increasing Fe(III)/Fe(II) further reduced CCT by 10 °C–20 °C. At 15 g·L −1 Cl − and a 1000:1 ratio, crevice corrosion initiated at room temperature. These results show that redox buffering and chloride jointly destabilize passive films in confined geometries and that electrochemical techniques may misrepresent localized corrosion resistance in hydrometallurgical environments.
Förderung
- Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Zong, P., Nakhaie, D., Khollari, M., & Asselin, E. (2026). Critical Crevice Temperature of 2205 Duplex Stainless Steel in Fe(III)/Fe(II)-Buffered Acidic Chloride Solutions. Journal of The Electrochemical Society, 173(9), 091503. https://doi.org/10.1149/1945-7111/ae62b1
Vancouver
Zong P, Nakhaie D, Khollari M, Asselin E. Critical Crevice Temperature of 2205 Duplex Stainless Steel in Fe(III)/Fe(II)-Buffered Acidic Chloride Solutions. Journal of The Electrochemical Society. 2026;173(9):091503. doi:10.1149/1945-7111/ae62b1
BibTeX
@article{Zong2026,
author = {Zong, P. and Nakhaie, D. and Khollari, MAR and Asselin, E.},
title = {Critical Crevice Temperature of 2205 Duplex Stainless Steel in Fe(III)/Fe(II)-Buffered Acidic Chloride Solutions},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {9},
pages = {091503},
doi = {10.1149/1945-7111/ae62b1}
}
EUVIMED