EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface-Engineered Porous Electrodes for High-Performance Alkaline Water Splitting

Mikey Jones, Ida Nawrocka, Thomas Mackay, Zhenyu Zhang, Jack Corbin, David Trudgeon, Cheng Lyu, Xiaohong Li

Journal of The Electrochemical Society · 14.04.2026 · 173 (7) · 074508

DOI: 10.1149/1945-7111/ae59b6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 08.04.2026. Verfasst von Mikey Jones und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC GW-SHIFT: Great Western Supercluster of Hydrogen Impact for Future Technologies, EPSRC Doctoral Training Partnership, Horizon 2020 MELODY project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a simple and scalable surface modification strategy to enhance the performance of nickel foam (NF) for alkaline water splitting. By employing a concentrated aqueous FeCl 3 ​ etchant, we achieved anisotropic etching that preferentially attacks the (111) facet, creating a striped surface morphology. This structural modification significantly increases surface hydrophilicity and reduces gas bubble departure size by approximately 31%, facilitating superior mass transport and minimising active site blocking. Electrochemical testing demonstrates that NF etched for 30 min (NF30m) exhibits exceptional oxygen evolution reaction (OER) activity, achieving overpotentials of 262 mV and 485 mV at current densities of 10 and 1000 mA cm −2 , respectively, a substantial improvement over pristine NF, with good stability over 20 h at 500 mA cm −2 . Furthermore, a marked reduction in Tafel slope (from 66.7 to 36.0 mV dec −1 ) and increased charge transfer during Ni(II)/Ni(III) redox transitions suggest that the etching process promotes the formation of the highly active γ −NiOOH. These findings highlight surface engineering via controlled chemical etching as a potent route for developing high-efficiency, low-cost electrodes for industrial-scale hydrogen production.

Förderung

  • EPSRC GW-SHIFT: Great Western Supercluster of Hydrogen Impact for Future Technologies
  • EPSRC Doctoral Training Partnership
  • Horizon 2020 MELODY project
  • Interreg 2 Seas Programme co-funded by the European Regional Development Fund
  • QUEX Institute Accelerator Grant
  • Henry Royce Institute

Zitieren

APA

Jones, M., Nawrocka, I., Mackay, T., Zhang, Z., Corbin, J., Trudgeon, D., Lyu, C., & Li, X. (2026). Surface-Engineered Porous Electrodes for High-Performance Alkaline Water Splitting. Journal of The Electrochemical Society, 173(7), 074508. https://doi.org/10.1149/1945-7111/ae59b6

Vancouver

Jones M, Nawrocka I, Mackay T, Zhang Z, Corbin J, Trudgeon D, et al. Surface-Engineered Porous Electrodes for High-Performance Alkaline Water Splitting. Journal of The Electrochemical Society. 2026;173(7):074508. doi:10.1149/1945-7111/ae59b6

BibTeX
@article{Jones2026,
  author = {Jones, Mikey and Nawrocka, Ida and Mackay, Thomas and Zhang, Zhenyu and Corbin, Jack and Trudgeon, David and Lyu, Cheng and Li, Xiaohong},
  title = {Surface-Engineered Porous Electrodes for High-Performance Alkaline Water Splitting},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {7},
  pages = {074508},
  doi = {10.1149/1945-7111/ae59b6}
}
Kostenlos starten →